Technical Information
Prekės būklė |
Nauja |
Gamintojo pavadinimas |
Blisterpack dimming |
Prekės ženklas |
ELTAKO
|
Kategorijos |
Jungikliai
|
Kilmės šalis |
CN |
Suderintos sistemos kodas |
8526 9200 00
|
Montavimo metodas |
Apatinis sluoksnis (tinko) |
Spalva |
Mėlynas |
Be halogeno |
Yes |
Paviršiaus apdorojimas |
Kita |
Srovės tiekimas |
230 V AC |
Tinka jungikliui |
No |
Tinka impulsiniam mygtukui |
No |
Tinka tamsinimo sistemai |
Yes |
Tinka suvyniojamos uždangos jungikliui |
No |
Medžiagos kokybė |
Termoplastikas |
Medžiaga |
Plastikinis |
Tvirtinimo tipas |
Kita |
Ritininio kodo sistema |
Yes |
Komandų skaičius |
32 |
Radijo dažnis |
868 MHz |
Korpuse |
Yes |
Vamzdžio bazės korpuse |
No |
Štampuojama grandinės plokštė / modulis |
No |
Paspaudimo mygtuko režimas |
Yes |
Perjungimo režimas |
No |
Su rankiniu radijo siųstuvu |
No |
Su radijo kodavimo įrenginiu |
No |
Su radijo bangomis valdomu paspaudžiamu mygtuku |
No |
Tinka su pakeliamų žaliuzių / suvyniojamos uždangos jungikliu |
No |
Tinka pakeliamų žaliuzių uždangos jungikliui |
No |
Permatomas |
No |
Paviršiaus tipas |
Kilimėlis |
Tinka apsaugos laipsniui (IP) |
IP20 |
Galimas IFTTT palaikymas |
No |
Suderinamas su Apple HomeKit |
No |
Suderinamas su Google Assistant |
No |
Suderinamas su Amazon Alexa |
No |
Pakavimo informacija
Pakavimo lygis 1 |
4010312324271, 4010312324271 |
Atsisiuntimai
Aprašymas
Blisterpack dimming with wireless pushbutton F2T55E-wg and wireless universal dimming actuator FD62NPN-230V. Smart Home sensor and Smart Home actuator. F2T55E-wg: Wireless 2-way pushbutton in E-Design55, 80x80mm external dimensions, internal frame dimensions 55x55mm, 15mm high. Generates the power for wireless telegrams itself when the button is pressed, therefore there is no connecting wire and no standby loss. With rocker. Smart Home sensor. Wireless pushbuttons with one rocker can transmit two evaluable signals: press rocker up and press rocker down. The mounting base can be screwed onto a flat surface or glued to the wall, on glass or on furniture using the enclosed adhesive foil. Use the sleeves in the 55mm socket box for screw mounting. FD62NPN-230V: Wireless universal dimming actuator. With power MOSFET. Dimmable LED lamps in phase cut-off mode up to 300W or in phase control mode up to 100W depending on ventilation conditions. 230V incandescent lamps and halogen lamps up to 300W depending on ventilation conditions. No inductive (wound) transformers. With children‘s rooms and snooze function. No minimum load. Only 0.5 watt standby loss. For installation. 49x51mm wide, 20mm deep. The terminals are plug-in terminals for conductor cross-sections of 0.2mm2 to 2.5mm2. Up to 32 wireless universal pushbuttons, wireless direction pushbuttons, wireless central control pushbuttons and motion sensors can be taught in using easy tap technology. Bidirectional wireless switchable. Zero passage switching with soft ON and soft OFF to protect lamps. Supply voltage, switching voltage and control voltage local 230V. The brightness level is stored on switch-off (memory). If supply voltage fails, the device is switched off in defined mode. Automatic electronic overload protection and overtemperature switch-off. In addition to the wireless control input via an internal antenna, this wireless actuator can also be controlled locally by a conventional 230V control switch if fitted previously. Glow lamp current is not permitted.