Canalis tap-off unit for KBA and KBB. It applied to lighting with light grey RAL 7035 surface treatment. The operational voltage is from 230VAC 50/60Hz to 240VAC 50/60Hz. The rated operational current is 10A at 35 ℃. This tap-off unit is pre-wired with SO5Z1-F 3x1.5mm² cable and 1m long. The two contact studs are movable and can be used to set up both L + N + PE and 2L + PE distribution. It is pre-equipped with a female GST18i3 connector for KDP Canalis busbar trunking. It provided L + N + PE and L2 + L1 + L3 + N + PE busbar trunking polarity, L1+L2/L1+L3/L1+N/L2+L3/L2+N/L2+N2/L3+N/L3+N3 tap-off unit polarity and phase selection connector. It provides IP55 protection conforming to IEC 60529 standard, which guarantees trunking protection against splashes and dust. Sold in lots of 10 units. Sold in lots of 10 units. It provides IP55 protection which conforming to IEC 60529 standard. Canalis products are compliant with IEC/EN 61439-6 standard. It is compliant with both IEC 60439-2 and IEC 61439-6. It is also compliant with Green Premium (RoHS/REACH).