Universal dimmer switch, Power MOSFET up to 400W

Prekės būklė	Nauja
Gamintojo pavadinimas	Universal dimmer switch, Power MOSFET up to 400W
Prekės ženklas	ELTAKO
Kategorijos	Jungikliai
Kilmės šalis	CN
Suderintos sistemos kodas	8536 5080 00
Kompleksinio bloko išdėstymas	Kita
Veikimo metodas	Prisilietimo valdymo mygtukas
Apkrovos tipas	Universalus
Nominali įtampa nuo / iki	230 V
Įrenginio plotis	45 mm
Įrenginio aukštis	45 mm
Įrenginio gylis	18 mm
Maks. perjungimo maitinimo šviesos diodas	400 W

Pakavimo lygis 1	4010312109564, 4010312109564
Pakavimo lygis 2	4010312109564
Pakavimo lygis 3	4010312109564

Montavimo metodas	Apatinis sluoksnis (tinko)
Spalva	Mėlynas
Be halogeno	Yes
Jungties tipas	Prisukamas gnybtas
Paviršiaus apdorojimas	Kita
Medžiagos kokybė	Termoplastikas
Medžiaga	Plastikinis
Tvirtinimo tipas	Įrengimas su varžtu
Šviesos vertės atmintis	Yes
Pastotės įvestis	No
Nuoseklioji užtamsinimo sistema	No
Naudotinas su judesio davikliu	No
Naudotinas su perdavimo mygtuku	No
Naudotinas su infraraudonųjų spindulių mygtuku	No
Naudotinas su buvimo rodmeniu	No
Naudotinas su mygtuku	Yes
Naudotinas su laiko jungikliu / laikmačiu	No
Kontrolinė įtampa nuo / iki	230 V
Permatomas	No
Paviršiaus tipas	Kilimėlis
Šerdies kryžminė sekcija nuo / iki	4 mm²
Galimas IFTTT palaikymas	No
Neryškus fazės nutrūkimas	Yes
Neryškus fazės dalijimas	Yes
Mažiausias įmontuoto įrenginio gylis	18 mm
App valdymas per Bluetooth	No
Vardinės galios apkrova	400 W
Nominalios galios indukcinė apkrova	400 VA
Nominalios galios talpinė apkrova	400 VA
Suderinamas su Apple HomeKit	No
Suderinamas su Google Assistant	No
Suderinamas su Amazon Alexa	No

Universal dimmer switch. Power MOSFET up to 400W. Automatic lamp detection. Standby loss 0.1 watt only. With adjustable minimum brightness or dimming speed. With switching operation for children's rooms and snooze function. For installation. 45mm long, 45mm wide, 18mm deep. Universal dimmer switch for lamps up to 400 watts, depending on ventilation conditions. Dimmable 230V LED lamps and dimmable energy saving lamps ESL dependent on the lamps electronics and the dimming technology. Zero passage switching with soft start and soft OFF to protect lamps. Control voltage, supply voltage and switching voltage 230V. No minimum load required. Short-time control commands switch on/off, permanent control varies the brightness to the maximum level. An interruption of control changes the direction of dimming. The setting of the brightness level is stored after switching off (Memory). In case of a power failure the switching position and the brightness level are stored. If applicable the dimmer will be switched on at the stored brightness level after the supply voltage is recovered. Automatic electronic overload protection and over-temperature switch-off. With the top rotary switch %lamp/dim speed either the dim speed can be adjusted or the minimum brightness level (completely dimmed down). The duration of soft-on and soft-off will be changed with the dimming speed. In operation, the bottom rotary switch determines, whether automatic lamp detection or special comfort positions should operate: AUTO allows the dimming of all lamp types. LC1 is a comfort position for dimmable 230V LED lamps which are not being dimmed down enough when set to AUTO (trailing phase angle) dependent on the construction and must therefore be forced to leading phase angle. LC2 and LC3 are comfort positions for dimmable 230V LED lamps like LC1, but with different dimming curves. EC1 is a comfort position for energy saving lamps which must be switched on with increased power dependent on the construction, so they will also switch on again safely in cold condition when dimmed down. EC2 is a comfort position for energy saving lamps which will not be switched on again when dimmed down dependent on the construction. Memory is switched off in this position. In positions LC1, LC2, LC3, EC1 and EC2 no inductive (wound) transformers should be used. In addition, the maximum number of dimmable LED lamps can be lower than in the AUTO position dependent on the construction. With special switching operation for children's rooms: If the light is switched on by holding down the pushbutton, it starts at the lowest brightness level after approx. 1 second and dims up slowly as long as the pushbutton is held down without modifying the last stored brightness level. Snooze function: With a double impulse the lighting is dimmed down from the current dimming position to the minimum brightness level and switched off. The current dimming position as well as the adjustable minimum brightness level determine the dimming time (max. = 60 minutes) which can be reduced as required. It can be switched off at any time by short-time control commands during the lighting is dimmed down. Holding down the pushbutton during the dimming down process dims up and stops the snooze function. Mixing of L loads (inductive loads, e.g. wound transformers) and C loads (capacitive loads, e.g. electronic transformers) is not permitted. R loads (ohmic loads, e.g. 230V incandescent lamps and halogen lamps) may be added anytime.