Technical Information
Prekės būklė |
Nauja |
Gamintojo pavadinimas |
1- and 2-level wireless repeater |
Prekės ženklas |
ELTAKO
|
Kategorijos |
Jutikliai
|
Kilmės šalis |
CN |
Suderintos sistemos kodas |
8526 9200 00
|
Nominali įtampa |
230 V |
Montavimo metodas |
Apatinis sluoksnis (tinko) |
EIB / KNX magistralės sistema |
No |
Magistralės sistemos radijo dažnis |
Yes |
„Powernet“ magistralės sistema |
No |
Kitos maršrutinės sistemos |
Nėra |
LON magistralinė sistema |
No |
Saugos laipsnis (IP) |
IP20 |
KNX radijo magistralės sistema |
No |
Mažiausias įmontuoto įrenginio gylis |
22 mm |
Pakavimo informacija
Pakavimo lygis 1 |
4010312320310, 4010312320310 |
Pakavimo lygis 2 |
4010312320310 |
Pakavimo lygis 3 |
4010312320310 |
Atsisiuntimai
Aprašymas
1 and 2 level wireless repeaters. Only 0.7 watt standby loss. For installation. 49x51mm wide, 20mm deep. The terminals are plug-in terminals for conductor cross-sections of 0.2mm2 to 2.5mm2. Supply voltage 230V. This repeater is only needed if the building conditions prevent undisturbed reception or the distance between the wireless pushbutton and receiver is too great. If the supply voltage is only connected to terminals L and N, Level 1 mode is active. Only wireless signals from sensors are received, tested and forwarded at full transmit power. If phase is connected to the Level 2 terminal in addition to the supply voltage, Level 2 mode is active. In addition to wireless signals from sensors, the wireless signals of Level 1 repeaters are processed. A wireless signal can then be received and amplified a maximum of two times. Wireless repeaters need not be taught in. They receive and amplify signals from all wireless sensors within their reception area.