Transmitter module with batteries
Sandėlyje esančios prekės kaina (be PVM):
62,98 €
Ši kaina galioja iki 2024-12-31
Kaina už m:
62,98 €
EAN: 4010312316092
MPN: 30000459
Mūsų sandėlis:
Ne
Pardavėjo atsargos:
Ne
Už pakuotę:
1
Už dėžę:
1
Už padėklą:
N/A
Techniniai duomenys
| Prekės būklė | Nauja |
| Gamintojo pavadinimas | Transmitter module with batteries |
| Prekės ženklas | ELTAKO |
| Kategorijos |
Jungikliai |
| Kilmės šalis | CN |
| Suderintos sistemos kodas | 8526 9200 00 |
| Srovės tiekimas | Baterija |
| Perdavimo diapazonas | 30 m |
| Ritininio kodo sistema | No |
| Komandų skaičius | 1 |
| Lygiai montuojamas radijo siųstuvas | No |
| Prie paviršiaus montuojamas radijo siųstuvas | No |
| Klaviatūros apsaugos gaubtas | No |
| Radijo dažnis | 868 MHz |
| Su rankiniu radijo siųstuvu | No |
| Su radijo kodavimo įrenginiu | No |
| Saugos laipsnis (IP) | IP20 |
Pakavimo informacija
| Pakavimo lygis 1 | 4010312316092, 4010312316092 |
| Pakavimo lygis 2 | 4010312316092 |
| Pakavimo lygis 3 | 4010312316092 |
Downloads
Aprašymas
Wireles transmitter module with batteries and antenna rod. LxWxH: 60x46x30mm (dimensions excluding antenna and fixing screws). This wireless transmitter module can be operated by a water sensor FWS60 or a pushbutton and transmits a variety of adjustable wireless telegrams to the Eltako building wireless system. An internal jumper permits selection between 4 operating modes. In mode 1 (jumper plugged at Position JP1) wireless telegrams is sent from a wireless pushbutton, such as Press double rocker at bottom left. In mode 2 (jumper plugged at Position 2) wireless telegrams is sent from a wireless pushbutton, such as Press double rocker at top right and bottom right. In mode 3 (jumper plugged at Position 3, factory setting) wireless telegrams is sent to EnOcean Standard EEP A5-30-03. In mode 4 (jumper plugged at Position 4) wireless telegrams is sent to EnOcean Standard EEP A5-30-01. In modes 3 and 4 a status telegram is also sent every 33 minutes. The power supply that lasts several years is provided by an internal 3V button cell CR2032. The charge status of the battery is transmitted in every data and status telegram in mode 4. Press the internal LRN button to teach in the actuator which is ready for teach-in. Release two screws on the front to remove the cover. When closing, make sure the seal is in the correct position. An M12 screw is located on the underside to connect the cable. It is not permitted to activate several wireless transmitter modules at the same time.