Recessed luminaires Arimo Fit C Prisms White ETDD 41W 5200lm Wide reduced glare UGR19 (W19) IK03 3 SDCM 7530651

Prekės būklė	Nauja
Gamintojo pavadinimas	Recessed luminaires Arimo Fit C Prisms White ETDD 41W 5200lm Wide reduced glare UGR19 (W19) IK03 3 SDCM 7530651
Prekės ženklas	TRILUX
Kategorijos	Sieniniai ir lubiniai šviestuvai
Kilmės šalis	DE
Korpuso spalva	Kita
Spalvos atkūrimo indeksas	20-39 (4 klasė)
Lempa	Kita
Smūgio stiprumas	IK00
Saugos laipsnis (IP)	Kita
Išspinduliavimo kampas (vertė)	Atviras spindulys/difuzinis

Pakavimo lygis 1	4018242522835, 4018242522835
Pakavimo lygis 2	4018242813933

Saugos klasė	Nėra
Lempos laikiklis	Kita
Jungties tipas	Kita
Įtampos tipas	Kintamoji srovė
Grotelių tipas	Kita
Įrenginio tipas	Elektrinis transformatorius
Korpuso medžiaga	Kita
Šviesos išvestis	Direct
Šviesos dalijimasis	Asimetriškas
Gaubto medžiaga	Kita
Šviesos spalva	Kita
Instaliacijos tipas	Tinka praeinamajai instaliacijai
Spalvinis darnumas (pagal McAdamso elipsę)	SDCM1
Foto biologinė sauga pagal EN 62471	Kita
NEMA apsaugos laipsnis	Kita
Kaitinimo bandymas pagal IEC 60695-2-11	Nėra
Šviesos skirstytuvas	Kita
Įmontuotos lemputės energijos efektyvumo klasė	Kita
Efektyvumo klasė energijos tiekiamos keičiamai lemputei	A
Aukščiausios energinio efektyvumo klasės keičiama lemputė	A
Keičiamos lempos žemiausia energijos efektyvumo klasė	A
Reguliuojama spalvų temperatūra	Ne
Reguliuojamas šviesos srautas	Ne
Reguliuojamas spindulio kampas	Ne
Gyvenamojo namo paviršiaus apsauga	Kita

Rectangular recessed LED luminaire with microprismatic cover PW. Version M46 (300 mm x 1200 mm). Optionally, the luminaire can be equipped with an emergency light system for ceiling recessing with an emergency light operation time of 3 hours. In emergency light operation, the luminaire luminous flux is 500 lm. Generation of an enhanced depth effect in the room. For system ceilings with exposed grids. The luminaire body is flush with the ceiling system on the room side. The Sky frame, optionally available as an accessory, creates a room-atmospheric depth effect in the classic, flat modular ceiling; the 3-dimensional contour of a skylight is reproduced. The optical system consists of a highly efficient PMMA cover with microprisms. The microstructured PMMA prism surface of the optical system has a glare-reducing effect, is non-yellowing and does not cloud. With symmetric limited wide light distribution. Glare evaluation according to UGR rating (EN 12464-1) < 19. Suitable for VDU workstations according to EN 12464-1 via limited luminance L ≤ 3000 cd/2 for beam angle above 65° all-round. Harmonious light effect due to homogeneously illuminated light emission. Individual design of the light emission surface (e.g. with printing) and other special solutions are possible on request. Luminaire luminous flux and light color fixed. Luminaire luminous flux 5200 lm, connected load 41 W, maximum luminous efficiency of luminaire 127 lm/W. Light colour neutral white, correlated colour temperature (CCT) 4000 K, general colour rendering index (CRI) Ra > 80. Colour locus tolerance (initial MacAdam) ≤ 3 SDCM. Mean rated service life L80(tq 25 °C) = 100,000 h, mean rated service life L90(tq 25 °C) = 50,000 h. The light source is replaceable according to the ecodesign requirements (VO (EU) 2019/2020). Luminaire body of extruded aluminium profile. Surface coated white (RAL 9016). Luminaire dimensions (L x W x H): 1196 mm, 296 mm, 22 mm. The narrow side profile is flush with the trunking. The luminaire frame is profiled in a 3-dimensional way to generate a depth effect on the ceiling. Luminaire can be covered with insulatin material at ta 25°C, ta35 °C without insulation materila can be also be used. Safety class (EN 61140): II, protection rating (DIN EN 60529): IP20, Protection rating on room side: IP40, impact resistance level in accordance with IEC 62262: IK03, testing temperature of wire glow test in accordance with IEC 60695-2-11: 650 °C. Weight: 3,4 kg. Polarity-protected rapid connection with mains through-wiring up to Ø 2.5 mm2. Connection of the ballast unit to the luminaire (Plug ‘N Play). The luminaire’s packaging concept facilitates separate removal of the control gear unit for pre-assembly, leaving the remaining luminaire components protected until final assembly. With external operating device, digitally dimmable (DALI). Control gear unit according to DALI-2 standard (EN 62386). Luminaire is switchable and dimmable by means of touch functionality via DALI control terminals (Touch DIM). The control gear unit is replaceable in accordance with the ecodesign requirements (VO (EU) 2019/2020). Control gear unit is open-circuit proof and protected against faulty connection, short circuit, overload and overtemperature. Output ripple of the control gear unit ≤ 4 % for effective control of the LED system and for flicker-free light. The luminaire can be equipped with the Monitoring Ready (MOR) functionality on request. The luminaire complies with the fundamental requirements of applicable EU regulations and product safety legislation and bears the CE symbol. The luminaire is also ENEC-certified by an independent testing authority. The luminaire is part of a range of recessed, surface-mounted and suspended luminaires with a harmonised appearance. The application variety of the product series is underlined by variants regarding luminous flux packages, light distribution curves and protection ratings. On request, the basic range can be expanded with project-specific luminaire features. Luminaire available for 10 years, spare parts (LED module, control gear unit, optical system) for 15 years from date of invoice, subject to reasonable modifications in the interests of progress.