Register to unlock your exclusive B2B prices. Register now
Current-limiting relay capacitive, 1 NO contact 16A image 1

Current-limiting relay capacitive, 1 NO contact 16A

Sandėlyje esančios prekės kaina (be PVM):
37,40 €
Ši kaina galioja iki 2024-12-31
Kaina už m: 37,40 €
EAN: 4010312205464
MPN: 61100330
Mūsų sandėlis: Ne Pardavėjo atsargos: Ne
Už pakuotę: 1 Už dėžę: 1 Už padėklą: N/A
Techniniai duomenys
Prekės būklė Nauja
Gamintojo pavadinimas Current-limiting relay capacitive, 1 NO contact 16A
Prekės ženklas ELTAKO
Kategorijos Priedai (automatika ir valdymas)
Kilmės šalis CN
Suderintos sistemos kodas 8536 4900 00
Montavimo metodas Kita
Nominali nuolatinė srovė Iu 16 A
Trumpo jungimosi srovės ribotuvas No
Maks. matoma galia 600 VA
Pakavimo informacija
Pakavimo lygis 1 4010312205464, 4010312205464
Pakavimo lygis 2 4010312205464
Pakavimo lygis 3 4010312205464
Downloads
Gilios nuorodos į produkto puslapį
Aprašymas
1 NO contact 10A/250V AC. No standby loss. Built-in device for installation. 45mm long, 45mm wide, 18mm deep. Max. capacitive load 120μF downstream of rectifier (e.g. energy saving lamps and electronic ballast) or 60μF directly at the mains (e.g. shunt-compensated fluorescent lamps). Limiting resistor 24Ω, limiting period approx. 15ms. The starting current impulse of energy saving lamps, fluorescent lamps and compact fluorescent lamps is limited to 10A by short-time switch on (approx. 15ms) of heavy-duty resistors (24Ω). The current-limiting relay is connected on the load side of the protected relay contact. Permanent load max. 600W, max. switching frequency 600/h. Explanation of capacitive load specification: The specified max. capacitive load directly at the mains is the deciding factor determining shunt-compensated fluorescent lamps or conventional ballast, for example. Here the capacitor switched in parallel to the mains is the deciding factor determining the correct dimensioning per lamp. The specified max. capacitive load downstream of the rectifier is the deciding factor determining fluorescent lamp ballast or energy saving lamps, for example. An equivalent capacitance of 10µF per lamp may be calculated.