Registruokitės, kad atrakintumėte savo išskirtines B2B kainas ir pradėtumėte apsipirkinėti. Užsiregistruokite dabar!
soft starter for asynchronous motor, ATS48, 52 A, 208..690 V, 11..45 KW image 1

soft starter for asynchronous motor, ATS48, 52 A, 208..690 V, 11..45 KW

Yra sandėlyje: Ne Pardavėjo atsargos: Ne Minimalus užsakymo kiekis: 1
Kaina (be PVM):
1 435,10 €
Ši kaina galioja iki 24.12.24
EAN: 3389110982282
MPN: ATS48D62Y
Pakuotė: 1
Padėklas: 2

Technical Information

Prekės būklė Nauja
Gamintojo pavadinimas soft starter for asynchronous motor, ATS48, 52 A, 208..690 V, 11..45 KW
Prekės ženklas Schneider Electric
Kategorijos Valdymo įranga
Kilmės šalis ID
Funkcija Vienkryptis
Su ekranu No
Nominali operacinė įtampa Ue 208-690 V
Nominali kontrolės maitinimo įtampa, kai AC 50 Hz 110-230 V
Nominali kontrolės maitinimo įtampa, kai AC 60 Hz 110-230 V
Saugos laipsnis (IP) IP20
Atlaisvinimo klasė Kita
Nominali operacinė srovė Ie, kai 40 °C Tu 62 A
Standartinio perjungimo nominalios galios trijų fazių variklis, kai 230 V 15 kW
Standartinio perjungimo nominalios galios trijų fazių variklis, kai 400 V 30 kW
3 šaknų perjungimo nominalios galios trijų fazių variklis, kai 230 V 0 kW
3 šaknų perjungimo nominalios galios trijų fazių variklis, kai 400 V 0 kW
Nominali aplinkinė temperatūra nesumažinant koeficiento 40 °C
Integruota variklio apsauga nuo perkrovų Yes
Aktyvacijos įtampos tipas Kintamoji ar nuolatinė srovė
Vidinis apėjimas/šuntas No
Sukimo momento valdymas Yes

Pakavimo informacija

Pakavimo lygis 1 3389110982282
Pakavimo lygis 2 3389110982281

Atsisiuntimai

Aprašymas

This Altistart 48 soft start/soft stop unit is a controller with 6 thyristors used for torque-controlled soft starting and stopping of three-phase asynchronous motors. It offers soft starting and deceleration functions along with machine and motor protection functions, as well as functions for communicating with control systems. It works at a rated supply voltage from 208V to 690V AC and up to 62A rating. Altistart 48 torque control enables starting without mechanical stress and smooth control of hydraulic transitions, with a single acceleration ramp making adjustments is quick and easy, whatever the load. It is suitable for motors with power rating up to 50hp (at 575V) / 45kW (at 690V) for standards applications and 40hp (at 575V) / 37kW (at 690V) for severe applications. It weighs 8.3kg and its dimensions are, 190mm wide, 290mm high, 235mm deep. It is designed for use in the most common applications for centrifugal machines, pumps, fans, compressors and conveyors, which are primarily to be found in the construction, food and beverage and chemical industries. It complies with IEC/EN 60947-4-2 standard and is certified CE, UL, CSA, DNV, C-Tick, GOST, CCC, NOM, SEPRO, and TCF. The Altistart 48 is connected directly to the Modbus bus via its RJ45 connector port, It can also be connected to Ethernet, Fipio, Profibus DP and DeviceNet networks via a module (bridge or gateway) to order separately. It is designed to be mounted in vertical position (+/- 10 °) on a panel, thanks to 4 fixing holes. Altistart 48 delivers high performance with its Torque Control System (TCS) for controlled starting and deceleration, an easy integration in enclosures and control systems. This range provides also continual improvement of your machine operation by reducing mechanical or hydraulic stress and limiting energy loss and temperature rise, plus more.