FM swit.act. 1-g 16 A bin.input 3-g OneKNX

Prekės būklė	Nauja
Gamintojo pavadinimas	FM swit.act. 1-g 16 A bin.input 3-g OneKNX
Prekės ženklas	Gira
Kategorijos	Jutikliai
Kilmės šalis	DE
Suderintos sistemos kodas	8536 4900 00
Montavimo metodas	Apatinis sluoksnis (tinko)
Nustatyta srovė	0 A
Išeigos galia	0 W
Nominali operacinė įtampa	NA V
EIB / KNX magistralės sistema	Yes
Magistralės sistemos radijo dažnis	No
„Powernet“ magistralės sistema	No
Maks. perjungimo galia	3000 W
Įtraukta magistralės jungtis	Yes
Maks. perjungiamų kontaktų skaičius	2
Skaitmeninių įvesčių skaičius	3
Modulinių tarpų skaičius plotyje	0
Maks. perjungimo srovė	16 A
LON magistralinė sistema	No
C apkrova	Yes
Prijungiamas prie skirtingų fazių	-
Lokali operacija / rankos operacija	No
Saugos laipsnis (IP)	IP20
Su LED rodmeniu	No
Modulinis praplečiamumas	No
KNX radijo magistralės sistema	No
Dvikryptis radijas	-
Nuimamas magistralės (šynos) modulis	No
Mažiausias įmontuoto įrenginio gylis	65 mm
Maks. perjungimo maitinimo šviesos diodas	NA W

Pakavimo lygis 1	4010337099284
Pakavimo lygis 2	4010337099284

Switching actuator, 1-gang 16 A with binary input, 3-gang for Gira One and KNX Flush-mounted Features: Inputs: Depending on the ETS parameterisation in the application for switches, buttons or contacts, inputs 1 and 2 either act internally on the relay output or separately on the KNX. Input 3 always acts on the KNX. Functions for the inputs when acting on the KNX (switching, dimming, blind, value transmitter, scene auxiliary unit, 2-channel operation, controller auxiliary unit, no function). Switching: Command for closing and opening of the contact adjustable (no reaction, ON, OFF, TOGGLE). Dimming: Dimming of brightness and or colour temperature. Command for closing the contact, time between switching and dimming, dimming in different steps, telegram repetition in case of long signal at the input, and sending of a stop telegram at the end of the dimming process all configurable. Blinds: Command for closing the contact and the operating concept can be parameterised. Times for short and long signal at input and slat adjustment are adjustable. Value transmitter: Functionality as 1-byte, 2-byte, 3-byte or 6-byte value transmitter including colour temperature and colour value transmitter possible. Individually configurable values. Value adjustment is optionally possible with a long signal at the input (not with the 6-byte value transmitter). Scene auxiliary unit: Mode of operation (with or without memory function) and the scene number are adjustable. 2-channel operation: When the contact at the input closes, up to two telegrams can be sent out on the KNX. Operating concept adjustable (only channel 1 or channel 2 both channels). The mode of operation of the channels (1-bit, 1-byte, 2-byte, 3-byte, 6-byte) can be configured separately. Controller auxiliary unit: Mode of operation (operating mode switching, forced operating mode switching, presence function and target value adjustment) configurable. Disabling of all or individual inputs via a 1-bit object possible. Polarity of the blocking object, behaviour at the beginning and end of blocking, and behaviour during an active blocking can be adjusted. Logic functions: The device has 8 internal logic functions. Logic gate (AND, OR, exclusive AND, exclusive OR, each with up to 4 inputs). 1-bit to 1-byte converter with input filter, blocking object and specification of output values. Blocking element with filter and time functions and blocking object. Comparator for values with 9 different input data formats and many comparison operations. Limit value switch with hysteresis with upper and lower threshold values for 9 different input data formats. Including specification of the 1-bit output values. The logic functions have their own KNX communication objects and can process telegrams from the actuator or other bus devices. Switching electrical consumers via a relay contact. Device has three inputs with a common reference potential. Reading in switching states of installation switches or push buttons and other zero-voltage contacts at inputs 1 to 3. Signal analysis of dew and leakage sensors (see accessories) at inputs 1 to 3. Recording of temperature values via remote sensors (see accessories) at input 3. Up to 8 independent logic functions for implementing simple or complex logical operations. Actively transmitting feedback or status messages can be delayed after a bus voltage recovery or ETS programming mode. Bistable relay. Switching functions: NO contact or NC contact operation. Central switching function via up to 6 switch objects (ON, OFF, permanently ON, permanently OFF). Feedback on switching: Active or passive feedback function. Reaction in case of bus voltage failure or bus voltage recovery can be set following an ETS programming process. Logical linking function. Block function or forced setting function can be parameterised. Extended blocking function with acknowledgement option. Time functions (switch-on and switch-off delay, staircase light function – also with advance warning function). Can be integrated in the light scenes: Up to 64 internal scenes can be parameterised. Scene memory function: Additional visual feedback. Extended scene retrieval (toggling of scenes). Elapsed operating time meter can be activated. Input monitoring for cyclic updating of the switching object with safety position. Notes : KNX Data Secure compatible. Fast application download (long frame support).