Technical Information
Toote seisukord |
Uus |
Tootja nimi |
CPW-E12, 230 V AC, 1 - 10 A |
Bränd |
METZ CONNECT
|
Kategooriad |
Releed
|
Päritoluriik |
DE |
Harmoneeritud süsteemi kood |
9030 3320 00
|
Laius |
22.5 mm |
Kõrgus |
75 mm |
Sügavus |
95 mm |
Pinge mõõteulatus |
NA V |
Eemaldatavate klambritega |
No |
Faasijärjestuse seire |
No |
Faasirikke jälgimine |
No |
Alapinge tuvastusfunktsioon |
No |
Liigpinge tuvastusfunktsioon |
No |
Faaside ebasümmeetria jälgimine |
No |
Elektriühenduse liik |
Kruviühendus |
Normaalselt suletud kontaktide arv |
0 |
Normaalselt avatud kontaktide arv |
0 |
Ümberlülituskontaktide arv |
1 |
Pakendamise üksikasjad
Pakkimistase 1 |
4250184121039 |
Pakkimistase 2 |
4250184121039 |
Kirjeldus
The cosPhi monitor is used for detecting underload. The response value and the response time can be adjusted. It can also be used in combination with a frequency converter (frequency: 2 to 200 Hz). Monitoring is accomplished by recognizing the phase shift between current and voltage. This phase angle varies depending on the motor load. The functions can be adjusted by means of bridges S1 - S2 - S3: S1 - S2 open = relay deactivated with underload, S1 - S2 bridged = relay activated with underload, S1 - S3 open = with fault memory, S1 - S3 bridged = without fault memory. The module can be unblocked remotely by means of a closing contact on S1 - S3. If there is a fault memory (no bridge over S1-S3), the fault message is active until it is acknowledged or the supply voltage is interrupted.