Technical Information
Toote seisukord |
Uus |
Tootja nimi |
Wireless receiver antenna module |
Bränd |
ELTAKO
|
Kategooriad |
Andurid
|
Päritoluriik |
CN |
Harmoneeritud süsteemi kood |
8526 9200 00
|
Paigaldusviis |
Pinnapealne |
Siinisüsteem KNX |
No |
Raadiosageduslik siinisüsteem |
Yes |
Siinisüsteem Powernet |
No |
Kinnitusviis |
Muul viisil |
Laius mooduli arvudes |
0 |
Muud siinisüsteemid |
Puudub |
Siinisüsteem LON |
No |
Siinisüsteem KNX radio |
No |
Raadiosageduslik, kahesuunaline |
Yes |
Pakendamise üksikasjad
Pakkimistase 1 |
4010312313848, 4010312313848 |
Pakkimistase 2 |
4010312313848 |
Pakkimistase 3 |
4010312313848 |
Allalaadimised
Kirjeldus
Wireless receiver antenna module for the RS485 sub-bus. Only 0.5 watt standby loss. SMA socket for small enclosed antenna. The reception range can be increased by placing a larger wireless antenna FA250*, FA200* or FAG55E- in the optimised position. Housing dimensions LxWxH: 78x40x22mm. Up to three wireless receiver modules in a separate mini-housing can be installed at any point in the building in addition to an FAM14 and connected via a Gateway FGW14 to the main bus by a 4-wire screened sub-bus line (e.g. telephone line). Therefore connect the terminals RSA/RSB of the FEM with the terminals RSA2/RSB2 of the FGW14 . Also connect the terminals +12V/GND of the FEM with the terminals +12V/GND of the FGW14. Wiring of several FEM should take place with a line in the form of a chain, as prescribed in RS485 bus systems. A radial wiring with one line per FEM is not allowed. In each of the three wireless receiver modules, the jumper must be plugged into a different position. For this purpose, carefully open the housing on the narrow side with a screwdriver at the side provided. Blade width 6.5mm, max. 1.5mm thick.