Maksimaalne väljund lineaarkoormusel nimiväljundpingel
4 kW
Suurim võimsus ruutkoormusel tunnusväljundpinge korral
4 kW
Suhteline sümmeetriline võrgu voolutolerants
10 %
Suhteline sümmeetriline võrgu sagedustolerants
10 %
Toetab andmesideprotokolli AS-Interface Safety at Work
No
Toetab andmesideprotokolli DeviceNet Safety
No
Toetab andmesideprotokolli EtherNet/IP
Yes
Toetab andmesideprotokolli Foundation Fieldbus
No
Toetab andmesideprotokolli PROFINET CBA
No
Toetab andmesideprotokolli PROFINET IO
No
Toetab andmesideprotokolli PROFIsafe
No
Toetab andmesideprotokolli SafetyBUS p
No
Suurim väljundpinge
500 V
Nimiväljundvool I2N
9.5 A
BACnet'i tugiprotokoll
No
Kaitseaste (NEMA)
4X
Pakendamise üksikasjad
Pakkimistase 1
4015081978274
Kirjeldus
Variable frequency drive, Part group reference (e.g. DIL): DC1, Rated operational voltage: Ue = 400 V AC, 3-phase, 480 V AC, 3-phase, Output voltage with Ve: U2 = 400 V AC, 3-phase, 480 V AC, 3-phase, Mains voltage (50/60Hz): ULN = 380 (-10%) - 480 (+10%) V, Rated operational current At 150% overload: Ie = 9.5 A, Note: Rated operational current at an operating frequency of 6 kHz and an ambient air temperature of +40 °C, Note: Overload cycle for 60 s every 600 s, Assigned motor rating Note: For normal internally and externally ventilated four-pole three-phase asynchronous motors with 1500 rpm at 50 Hz and 1800 rpm at 60 Hz , Overload cycle for 60 s every 600 s, at 400 V, 50 Hz, Assigned motor rating 150 % Overload: P = 4 kW, 150 % Overload: IM = 8.5 A, Assigned motor rating Note: at 440 - 480 V, 60 Hz, Assigned motor rating 150 % Overload: P = 5 HP, Assigned motor rating 150 % Overload: IM = 7.6 A, Degree of Protection: IP66/NEMA 4X, Interface/field bus (built-in): OP-Bus (RS485)/Modbus RTU, CANopen®, Fieldbus connection (optional): SmartWire-DT, Fitted with: Radio interference suppression filter, Brake chopper, 7-digital display assembly, Local controls, Additional PCB protection, UV resistant, Frame size: FS2, Standards: General requirements: IEC/EN 61800-2 , EMV requirements: IEC/EN 61800-3, Safety requirements: IEC/EN 61800-5-1