Registreeru, et avada oma eksklusiivsed B2B hinnad ja alustada ostlemist. Registreeru kohe!
RS485 bus pushbutton gateway image 1
ELTAKO

RS485 bus pushbutton gateway

Laos: Ei Hankija laovaru: Ei Minimaalne tellimuse kogus: 1
Hind (ilma KM-ta):
90,99 €
Hind kehtib kuni 31.12.24
EAN: 4010312315088
MPN: 30014061
Pakend: 1

Technical Information

Toote seisukord Uus
Tootja nimi RS485 bus pushbutton gateway
Bränd ELTAKO
Kategooriad Andurid
Päritoluriik CN
Harmoneeritud süsteemi kood 8526 9200 00
Paigaldusviis DRA (DIN liistule)
Siinisüsteem KNX No
Raadiosageduslik siinisüsteem Yes
Siinisüsteem Powernet No
Kinnitusviis Klamberpaigaldus
Laius mooduli arvudes 2.5
Muud siinisüsteemid Muul viisil
Siinisüsteem LON No
Kaitseaste (IP) IP20
Toimepunktide arv 10
Siinisüsteem KNX radio No
Raadiosageduslik, kahesuunaline Yes

Pakendamise üksikasjad

Pakkimistase 1 4010312315088, 4010312315088
Pakkimistase 2 4010312315088
Pakkimistase 3 4010312315088

Allalaadimised

Toote lehe süvalink

Kirjeldus

Pushbutton gateway for FTS14 systems. Only 1.3 watt standby loss. Modular device for DIN-EN 60715 TH35 railmounting. 2,5 modules = 45mm wide, 58mm deep. To improve heat dissipation, provide a ventilation gap ½ a pitch unit wide on the left-hand side. Use the enclosed spacer DS14 for this purpose. Power supply 230V. Connection to the Eltako-RS485 bus. Bus cross wiring and power supply with jumper. Operation in conjunction with FAM14 or FTS14KS. Using up to 3 pushbutton gateways FTS14TG, you can feed the telegrams of up to 90 4-way bus switches B4T55E or pushbutton bus couplers FTS61BTK, FTS61BTKL and FTS61BTK/8 connected over a 2-wire bus with conventional pushbuttons connected to them. Data transfer and power supply take place ­simultaneously over 2 wires only. This avoids a mass of single pushbutton control lines. An FTS14EM device is then not required. Up to 30 B4T55E, FTS61BTK, FTS61BTKL and FTS61BTK/8 devices can be connected to an FTS14TG pushbutton gateway. A voltage of 29V DC is supplied to the connected devices over a 2-wire bus which is also used for data transfer. Please use only conventional bus or telephone lines. The 2-wire bus is electrically isolated from the Eltako RS485 bus. The permitted maximum line length is 200m. The RLC device enclosed with the FTS14TG must also be connected to the terminals BP and BN on the bus switch or pushbutton bus coupler furthest away. Pushbutton telegrams from the connected devices are transmitted by an FTS14FA device over the Eltako RS485 bus and over the Eltako building wireless system.