Registreeru, et avada oma eksklusiivsed B2B hinnad ja alustada ostlemist. Registreeru kohe!
Wireless single-phase energy meter
Laos: Ei
Hankija laovaru: Ei
Minimaalne tellimuse kogus: 1
Hind (ilma KM-ta):
78,21 €
EAN: 4010312311059
MPN: 30000308
Pakend: 1
Technical Information
| Toote seisukord | Uus |
| Tootja nimi | Wireless single-phase energy meter |
| Bränd | ELTAKO |
| Kategooriad |
Andurid |
| Päritoluriik | CN |
| Harmoneeritud süsteemi kood | 8526 9200 00 |
| Mudel | Muul viisil |
| Ühenduse liik | Otsene |
| Siinisüsteem KNX | No |
| Raadiosageduslik siinisüsteem | Yes |
| Siinisüsteem Powernet | No |
| Tariifi lüliti | No |
| S0 impulssliides | Puudub |
| Reaktiivvõimsus | - |
| Täpsusklass | 1 |
| Heakskiidetud vastavalt PTB-le | No |
| Muud siinisüsteemid | Puudub |
| Siinisüsteem LON | No |
| Siinisüsteem KNX radio | No |
| Raadiosageduslik, kahesuunaline | No |
Pakendamise üksikasjad
| Pakkimistase 1 | 4010312311059, 4010312311059 |
| Pakkimistase 2 | 4010312311059 |
| Pakkimistase 3 | 4010312311059 |
Allalaadimised
Kirjeldus
Wireless single-phase energy meter, maximum current 65A. Only 0.5 watt standby loss. Modular device for DIN-EN 60715 TH35 rail mounting. 1 module = 18mm wide, 58mm deep. This single-phase energy meter measures active energy by means of the current between input and output and transmits the current power and meter reading over the Eltako wireless network. Accuracy class B (1%). Evaluation and smart link via Smart Home-Controller. The internal power consumption of max. 0.5 watt active power is not metered. Like all meters without declaration of conformity (e.g. MID), this meter is not permitted for billing. 1 phase conductor with a max. current up to 65A can be connected. If the anticipated load exceeds 50%, maintain an air gap of ½ pitch unit to the devices mounted adjacently. If necessary, use spacer DS12. The inrush current is 40mA. The consumption is saved to a non-volatile memory and is immediately available again after a power failure. Wireless telegrams: A telegram is transmitted within 60 seconds if the power status changes by min. 10 percent. A change in meter reading is transmitted immediately. A full telegram comprising meter reading and power status is transmitted every 10 minutes. When the power supply is switched on, a teach-in telegram is sent to teach in the associated energy consumption indicator. If the L input and the L output were interchanged when hooked up, a normal rate (HT)/off-peak (NT) switchover telegram is transmitted to indicate the hook-up error.