Technical Information
Toote seisukord |
Uus |
Tootja nimi |
Line-Voltage Fan Coil Room Controller: BACnet MS/TP, RH sensor & control, White Case/Fascia |
Bränd |
Schneider Electric
|
Kategooriad |
Andurid
|
Päritoluriik |
MX |
Paigaldusviis |
Pinnapealne |
Kooste ehitus |
Juhtelement |
Värvus |
Valge |
Pinnatöötlus |
Töötlemata |
Kuvariga |
Yes |
Materjal |
Termoplastist |
Siinisüsteem KNX |
No |
Raadiosageduslik siinisüsteem |
No |
Siinisüsteem Powernet |
No |
Siiniühendusega |
Yes |
Digitaalsisendite arv |
0 |
Materjal |
Plast |
Muud siinisüsteemid |
Muul viisil |
Siinisüsteem LON |
No |
Vargusevastane/lahtimonteerimiskaitse |
Yes |
Käsisäte |
Yes |
Võimalik on paralleelne hooldus |
Yes |
Kohalolunupp |
Yes |
RAL-number (akin) |
9010 |
Kaitseaste (IP) |
IP20 |
LED näidikuga |
No |
Läbipaistev |
No |
Pinna liik |
Matt |
Lokaaljuhtimisega |
Yes |
Siinisüsteem KNX radio |
No |
Raadiosageduslik, kahesuunaline |
No |
Temperatuurijuhtimise klass |
VIII |
Ooteoleku võimsustarve (solstandby) |
0 W |
Sisseehitatud paigalduskarbi vähim sügavus |
0 mm |
Pakendamise üksikasjad
Pakkimistase 1 |
3606480771606 |
Pakkimistase 2 |
3606480771604 |
Allalaadimised
Kirjeldus
SER8300 Series room controllers are used for Line Voltage Fan Coil Unit control. The room controllers rated supply voltage is 7V DC at 2.4watts. The room controller is colored white and is equiped with a communication port that uses BACnet MS/TP protocol. Its Room and Outdoor Air Temperature Display Range is between -40 and 50 oC. The measurement accuracy is +/- 0.5%. The temperature setting range is 12 to 37.5oC for cooling and 4.5 to 32 oC for heating. The room controller is equiped with 3 digital inputs. The product follows the following standards: IEC 61326-1: 2005, FCC part 15 subpart C, RSS 210 issue 8, FCC part 15 subpart B, ICES-003, EN 60950-1: 2006/A2, EN 60950-1: 2013, ETSI EN 301 489-1: v1.9.2. The product follows the directives: 2014/30/EU - electromagnetic compatibility, 2014/35/EU - low voltage directive, 2014/53/EU - radio equipment directive. The ambient air temperature for operation is between 0 and 50oC. The relative humidity for operating or storage is between 0 and 75% non condensing. The humidity reading range is 10 to 90% RH non-condensing.