Technical Information
Toote seisukord |
Uus |
Tootja nimi |
MR-DIO4/2 Modbus RTU |
Bränd |
METZ CONNECT
|
Kategooriad |
Andurid
|
Päritoluriik |
DE |
Harmoneeritud süsteemi kood |
8517 6200 00
|
Paigaldusviis |
DRA (DIN liistule) |
Sisendite arv |
4 |
Tunnus-talitluspinge |
20-28 V |
Siinisüsteem KNX |
No |
Raadiosageduslik siinisüsteem |
No |
Siinisüsteem Powernet |
No |
Siiniühendusega |
Yes |
Laius mooduli arvudes |
3 |
Kaugtalitlus on võimalik |
Yes |
Ethernet |
No |
Vajalik on väline signaalipinge |
No |
Muud siinisüsteemid |
Muul viisil |
Siinisüsteem LON |
No |
C-koormus |
No |
Primaarpinge |
NA V |
LED juhtimine |
Yes |
Eri faaside ühendamine |
No |
Lokaaljuhtimine/käsijuhtimine |
Yes |
Lülitusfunktsiooniga |
Yes |
Kaitseaste (IP) |
IP20 |
LED näidikuga |
Yes |
Siinisüsteem KNX radio |
No |
Pakendamise üksikasjad
Pakkimistase 1 |
4250184135623, 4250184135623 |
Kirjeldus
The Modbus module with 4 digital inputs and 2 relay outputs with manual control was developed for decentralized switching tasks. It is suitable for accommodating, for example, light switches and window contacts in a room, switching 2 light strips or controlling louvers. It can also be used to control 2 motorized fire dampers. In this case it is necessary to protect the relay contacts by appropriate load-dependent measures. The inputs can be used as contact or voltage inputs. The inputs and outputs can be switched and scanned by means of standard registers via a Modbus master. Module address, bit rate and parity are set with 2 rotary switches on the front or by software. Suitable for decentralized mounting on DIN TH35 rail according to IEC 60715 in electrical distribution cabinets.Connection with screw type terminal blocks