Registreeru, et avada oma eksklusiivsed B2B hinnad ja alustada ostlemist. Registreeru kohe!
Motor isolating relay, 2 + 2 NO contacts 5A image 1
ELTAKO

Motor isolating relay, 2 + 2 NO contacts 5A

Laos: Ei Hankija laovaru: Ei Minimaalne tellimuse kogus: 1
Hind (ilma KM-ta):
46,59 €
Hind kehtib kuni 31.12.24
EAN: 4010312205211
MPN: 22400601
Pakend: 1

Technical Information

Toote seisukord Uus
Tootja nimi Motor isolating relay, 2 + 2 NO contacts 5A
Bränd ELTAKO
Kategooriad Juhtimisseadmed lülitite ja pistikupesade jaoks
Päritoluriik CN
Harmoneeritud süsteemi kood 8536 4900 00
Nimipinge 250 V
Paigaldusviis DRA (DIN liistule)
Tunnusvool 5 A
Sagedus 50 Hz
Ühendatavate mootorite arv 2
Alajaama sisend No
Kesksisend No

Pakendamise üksikasjad

Pakkimistase 1 4010312205211, 4010312205211
Pakkimistase 2 4010312205211
Pakkimistase 3 4010312205211

Allalaadimised

Toote lehe süvalink

Kirjeldus

Motor isolating relay, 2+2 NO contacts not potential free 5A/250V AC for one or two 230V-motors. Standby loss 0.5 watt only. Modular device for DIN 60715 TH35 rail mounting. 1 module = 18mm wide, 58mm deep. Universal control voltage 8..230V UC. 230V supply voltage. The tube-mounted motors of shading elements and roller shutters must not be connected in parallel, or reverse voltages will occur through the limit switches, ultimately causing failure of the motors. For one motor and if the control voltage and the motor voltage are 230V, one EGS12Z-UC is adequate. Where more than one motor is controlled by an EGS12Z-UC or in case the control voltage is different, one MTR12-UC must be connected to two motors. It must be remembered that the MTR12-UC devices, while they can be operated in parallel, require unassigned contact outputs K2/K3 of the controlling EGS12Z-UC. These have to be connected to terminals K2/K3 of the MTR12-UC. 1/2 = motor 1, 3/4 = motor 2. The functions UP and DOWN may be blocked or switched off entirely by a rotary switch. This block applies only to the max. 2 connected motors. Therefore single shading elements or roller shutters can be completely or partially excepted from the automatic function of an over-all control.