Registreeru, et avada oma eksklusiivsed B2B hinnad ja alustada ostlemist. Registreeru kohe!
Mains monitoring relay monitoring the rotating field, 1 CO contact 10A image 1
ELTAKO

Mains monitoring relay monitoring the rotating field, 1 CO contact 10A

Laos: Ei Hankija laovaru: Ei Minimaalne tellimuse kogus: 1
Hind (ilma KM-ta):
39,26 €
Hind kehtib kuni 31.12.24
EAN: 4010312202524
MPN: 22001330
Pakend: 1

Technical Information

Toote seisukord Uus
Tootja nimi Mains monitoring relay monitoring the rotating field, 1 CO contact 10A
Bränd ELTAKO
Kategooriad Releed
Päritoluriik CN
Harmoneeritud süsteemi kood 8536 4900 00
Laius 18 mm
Kõrgus 58 mm
Sügavus 58 mm
Pinge mõõteulatus 230 V
Eemaldatavate klambritega No
Faasijärjestuse seire Yes
Faasirikke jälgimine Yes
Alapinge tuvastusfunktsioon Yes
Liigpinge tuvastusfunktsioon Yes
Faaside ebasümmeetria jälgimine No
Elektriühenduse liik Kruviühendus
Juhtahelate tunnus-toitepinge, AC 50 Hz 250 V
Juhtahelate tunnus-toitepinge, AC 60 Hz 250 V
Suurim lubatud väljalülitusviivitus 8 s
Minimaalne seadistatav väljalülitusviivitus 0.1 s
Aktiveerimispinge liik AC
Normaalselt suletud kontaktide arv 0
Normaalselt avatud kontaktide arv 0
Ümberlülituskontaktide arv 1

Pakendamise üksikasjad

Pakkimistase 1 4010312202524, 4010312202524
Pakkimistase 2 4010312202524
Pakkimistase 3 4010312202524

Allalaadimised

Toote lehe süvalink

Kirjeldus

1 CO contact potential free 10A/250V AC. 230V LED lamps up to 200W, incandescent lamp load 2000W. Standby loss 0.8 watt only. Modular device for DIN 60715 TH35 rail mounting. 1 module =18mm wide, 58mm deep. Designed to monitor 230V AC voltage between 1 to 3 phase conductors and neutral and to monitor the rotating field (clockwise) in the switch positions 2Ph and 3Ph. In the position rotating field only the rotating field is monitored, independent from the mains voltage. Supply voltage L1-N 180-250V/50Hz. In case of failure of L1 the relay releases immediately without delay. With the lower rotary switch on the front two operate voltages resp. dropout voltages can be set and the number of monitored phase conductors must be selected. U1: 161V dropout voltage and 185V operate voltage. U2: 196V dropout voltage and 206V operate voltage as per VDE 0100, part 718 (formerly: VDE 0108, part 1). Voltage applied signalled by LED. At wrong polarity or in case of a missing phase conductor the LED flashes rapidly. Release delay RV settable with the upper rotary switch from 0.1 to 8sec. The LED flashes slowly during the release delay time period. Operate delay 0.5sec. Maximum fusing 16A.