Powerline wireless gateway

Toote seisukord	Uus
Tootja nimi	Powerline wireless gateway
Bränd	ELTAKO
Kategooriad	Andurid
Päritoluriik	CN
Harmoneeritud süsteemi kood	8526 9200 00
Paigaldusviis	Süvistatud paigaldus (krohvi)
Mudel	Muul viisil
Pinge liik	AC
Võimsustarve	1.1 W
Siinisüsteem KNX	No
Raadiosageduslik siinisüsteem	Yes
Siinisüsteem Powernet	No
Muud siinisüsteemid	Muul viisil
Siinisüsteem LON	No
Lahtimonteerimise kaitse	No
Raadioliides	Yes
Infrapunaliides	No
Protokoll	Muul viisil
Sõltuvalt tarnijast	No
Uuendatav	No
Visualiseerimine	No
Veebiserver	No
Talitluspinge	230 V
LED näidikuga	No
Siinisüsteem KNX radio	No
Raadiosageduslik, kahesuunaline	Yes

Pakkimistase 1	4010312324110, 4010312324110
Pakkimistase 2	4010312324110
Pakkimistase 3	4010312324110

Powerline wireless gateway. Bidirectional. 53x43mm, 40mm deep for mounting in 58mm switch boxes. Standby loss 1.1 watt. Supply voltage 230V. Power consumption in operation 1.1 watt. Powerline telegrams from the grid taught-in into the gateway are automatically transformed and sent into Eltako wireless telegrams. Wireless telegrams taught-in into the gateway are transformed into powerline telegrams and modulated to the power supply grid. By pressing the reset button, the PL-FGW will be put into the teaching-in mode. The rotary switch selects, whether wireless or powerline telegrams should be taught-in. One being taught powerline sensor is automatically assigned by operating in the learning mode , a free radio channel. Up to 80 Powerline sensors or feedbacks can be taught-in. The function as a universal, direction or central pushbutton for a taught-in wireless sensor is assigned via slide switch of the PL-FGW. The Powerline address is set via rotary switch g and e which should be addressed with the wireless sensor. In addition to wireless switches also Eltako wireless sensors such as window contacts and motion detectors can be taught-in. Also control functions of the Professional Smart Home controller for dimmer switches and roller shutter control is possible. The implementation into practical Powerline telegrams für PL actuators is done automatically. Up to 100 different wireless sensor can be taught-in. All entries and configurations can also be accessed via the mains using the Sienna Professional PC software. This can then be used to select other functions that are not available through direct teach-in using a rotary switch. In addition, the gateway can be set into the learn and deletion mode, so that a manual teaching-in can be carried out without direct access to the device. The PL-FGW also serves as a relay station for communication between the temperature controller PL-SAMTEMP with EnOcean actuator FKS-MD1. Up to 20 actuators and PL-SAMTEMP are managed here.