Registreeru, et avada oma eksklusiivsed B2B hinnad ja alustada ostlemist. Registreeru kohe!
PM5560 Meter, 2 ethernet, up to 63th H, 1,1M 4DI/2DO 52 alarms
Laos: Ei
Hankija laovaru: Ei
Minimaalne tellimuse kogus: 1
Hind (ilma KM-ta):
800,98 €
EAN: 3606480614064
MPN: METSEPM5560
Pakend: 1
Karp: 12
Technical Information
| Toote seisukord | Uus |
| Tootja nimi | PM5560 Meter, 2 ethernet, up to 63th H, 1,1M 4DI/2DO 52 alarms |
| Bränd | Schneider Electric |
| Kategooriad |
Automaatika ja juhtimine
|
| Päritoluriik | IN |
| Harmoneeritud süsteemi kood | 9028 3090 00 |
| Paigaldusviis | Esipaigaldus |
| Laius | 0 mm |
| Mudel | Mõõtetrafo |
| Kõrgus | 0 mm |
| Pinge liik | AC/DC |
| Mõõteväärtuste mälu | Yes |
| Näidik | Graafiline |
| Sageduse mõõtmine | Yes |
| Suurim vool (Imax) | 10 A |
| Reaktiivvõimsus | Yes |
| Täpsusklass | 0.2 |
| Tippväärtuste mõõtmine | Yes |
| Mõõteulatus | 20-690 V |
| Võimsustegur | Yes |
| Aktiivvõimsus | Yes |
| Näivvõimsus | Yes |
| Nihkenurk (cos phi) | No |
| Tugiprotokoll LON | No |
| Tugiprotokoll MODBUS | Yes |
| Maksimaalväärtuse salvastamine | Yes |
| Minimaalväärtuse salvestamine | Yes |
| Andmesideliidese liik RS-485 | Yes |
| Kalibreeritud | No |
| Impulssväljund | Optiline |
| Poolused | Neljajuhiline |
| Koormusdiagrammi mõõtmine | Yes |
| Tunnusvool (In) | 5 A |
| With communication interface KNX | No |
| With communication interface according to EN 62056-21 | No |
| Wth communication interface M-Bus | No |
Pakendamise üksikasjad
| Pakkimistase 1 | 3606480614064 |
| Pakkimistase 2 | 3606480614062 |
Allalaadimised
ECOP (Keskkonna hea tava kood)
EPD deklaratsioon (Keskkonnatoote deklaratsioon)
Tehniline käsiraamat
Muu
CE DOC deklaratsioon (CE vastavusdeklaratsioon)
Kasutusjuhend
Paigaldusjuhend
Kirjeldus
This device is a flush-mount energy meter with a 96mm by 96mm backlit LCD display. The meter provides Class 0.2S accuracy per IEC 62053-22 standard and 128 samples per cycle. The meter will measure Energy, Active and Reactive Power, Voltage, Current, Frequency, Power Factor and up to the 63rd Harmonic. Include 1.1 MegaBytes of memory for up to 14 selectable parameters with configurable interval and duration. This meter also feature the direct monitoring of neutral current. The meter will function in a 50Hz or 60Hz network and accepts supply voltage ranging from 100 to 480 VAC and 125 to 250 VDC. Line rated current for this meter is 1A or 5A input and will support Single Phase and Neutral, Three Phase, or Three Phase and Neutral configurations. The range of measurement voltage between Phases is 20 to 690 VAC at 45 to 65 Hz. Measurement range between Phase and Neutral is 20 to 400VAC at 45 to 65 Hz. Communication protocol are Modbus RTU and ASCII 2 wires with RS485 port support plus Modbus TCP/IP, Ethernet/IP and BACnet/IP based on 10/100 Mbit/s, daisy chain Ethernet with RJ45 port support. The embedded communication capabilities allow the support of the DNP 3.0 protocol, the access to an onboard web server and a Serial to Ethernet gateway. The meter also has four digital inputs with WAGES support and two digital outputs. There are 52 configurable alarms and it supports eight tariff schedules. Product dimensions are as follows: width 3.78 inches (96 millimetres), depth 3.03 inches (77 millimetres), height 3.78 inches (96 millimetres) and product weight 15.9 onces (450 g).