Technical Information
Toote seisukord |
Uus |
Tootja nimi |
Room Controller Touch, pure white, gloss, with Legacy firmware for SHC and CSAU |
Bränd |
EATON
|
Kategooriad |
Andurid
|
Päritoluriik |
CZ |
Harmoneeritud süsteemi kood |
8536 5011 00
|
Paigaldusviis |
Pinnapealne |
Kooste ehitus |
Põhielement täiskorpusega |
Värvus |
Valge |
Pinnatöötlus |
Töötlemata |
Kuvariga |
Yes |
Materjal |
Termoplastist |
Siinisüsteem KNX |
No |
Raadiosageduslik siinisüsteem |
Yes |
Siinisüsteem Powernet |
No |
Siiniühendusega |
Yes |
Digitaalsisendite arv |
0 |
Materjal |
Plast |
Muud siinisüsteemid |
xComfort |
Siinisüsteem LON |
No |
Vargusevastane/lahtimonteerimiskaitse |
No |
Käsisäte |
Yes |
Võimalik on paralleelne hooldus |
Yes |
Kohalolunupp |
No |
RAL-number (akin) |
9010 |
Kaitseaste (IP) |
IP20 |
LED näidikuga |
No |
Läbipaistev |
No |
Pinna liik |
Läikiv |
Lokaaljuhtimisega |
Yes |
Siinisüsteem KNX radio |
No |
Raadiosageduslik, kahesuunaline |
Yes |
Temperatuurijuhtimise klass |
IV |
Ooteoleku võimsustarve (solstandby) |
0.05 W |
Sisseehitatud paigalduskarbi vähim sügavus |
0 mm |
Välisandur |
Yes |
Pakendamise üksikasjad
Pakkimistase 1 |
9010653030263 |
Pakkimistase 2 |
9010238226371 |
Kirjeldus
Room Controller Touch, pure white gloss, with temperature and humidity sensor is suitable to monitor and control the climate in a room either stand-a-lone or together with an intelligent device. The operation is done through the Touch display with backlight. The user programmable Week Program Timer and 4 Operation modes offer maximum flexibility to meet the specific needs. It supports floor temperature control via an optional external wired floor temperature sensor (PT1000). Two optional touch-buttons on the display are available to control other xComfort functions/actuators . The Room Controller Touch is compatible with many 55 mm frames from the switch industry (observe the compatibility list). The device is battery powered and NO switch, branch or installation box is required, therefore it can be easily mounted anywhere (screwed and glued). Battery included as standard, but it can also be powered with an optional mains power adapter. Important! This Room Controller Touch is pre-programmed with the Legacy software that works with the xComfort SHC, Switching actuator and Heating actuator.