Maksimaalne väljund lineaarkoormusel nimiväljundpingel
2.2 kW
Suurim võimsus ruutkoormusel tunnusväljundpinge korral
2.2 kW
Suhteline sümmeetriline võrgu voolutolerants
10 %
Suhteline sümmeetriline võrgu sagedustolerants
10 %
Toetab andmesideprotokolli AS-Interface Safety at Work
No
Toetab andmesideprotokolli DeviceNet Safety
No
Toetab andmesideprotokolli EtherNet/IP
Yes
Toetab andmesideprotokolli Foundation Fieldbus
No
Toetab andmesideprotokolli PROFINET CBA
No
Toetab andmesideprotokolli PROFINET IO
No
Toetab andmesideprotokolli PROFIsafe
No
Toetab andmesideprotokolli SafetyBUS p
No
Suurim väljundpinge
250 V
Nimiväljundvool I2N
11 A
BACnet'i tugiprotokoll
No
Kaitseaste (NEMA)
4X
Pakendamise üksikasjad
Pakkimistase 1
4015081977970
Kirjeldus
Variable frequency drive, Part group reference (e.g. DIL): DC1, Rated operational voltage: Ue = 230 V AC, 1-phase, 240 V AC, single-phase, Output voltage with Ve: U2 = 230 V AC, 3-phase, 240 V AC, 3-phase, Mains voltage (50/60Hz): ULN = 200 (-10%) - 240 (+10%) V, Rated operational current At 150% overload: Ie = 10.5 A, Note: Rated operational current at an operating frequency of 6 kHz and an ambient air temperature of +40 °C, Note: Overload cycle for 60 s every 600 s, Assigned motor rating Note: For normal internally and externally ventilated four-pole three-phase asynchronous motors with 1500 rpm at 50 Hz and 1800 rpm at 60 Hz , Overload cycle for 60 s every 600 s, at 230 V, 50 Hz, Assigned motor rating 150 % Overload: P = 2.2 kW, 150 % Overload: IM = 8.7 A, Assigned motor rating Note: at 220 - 240 V, 60 Hz, Assigned motor rating 150 % Overload: P = 3 HP, Assigned motor rating 150 % Overload: IM = 9.6 A, Degree of Protection: IP66/NEMA 4X, Interface/field bus (built-in): OP-Bus (RS485)/Modbus RTU, CANopen®, Fieldbus connection (optional): SmartWire-DT, Fitted with: Radio interference suppression filter, Brake chopper, 7-digital display assembly, Local controls, Additional PCB protection, UV resistant, Frame size: FS2 , Standards: General requirements: IEC/EN 61800-2, EMV requirements: IEC/EN 61800-3, Safety requirements: IEC/EN 61800-5-1