Registreeru, et avada oma eksklusiivsed B2B hinnad ja alustada ostlemist. Registreeru kohe!
VIGILOHM IM9 110 - 415 VAC
Laos: Ei
Hankija laovaru: Jah
Minimaalne tellimuse kogus: 1
Hind (ilma KM-ta):
269,55 €
EAN: 3606480321658
MPN: IMD-IM9
Pakend: 1
Karp: 36
Technical Information
| Toote seisukord | Uus |
| Tootja nimi | VIGILOHM IM9 110 - 415 VAC |
| Bränd | Schneider Electric |
| Kategooriad |
Releed |
| Laius | 71 mm |
| Funktsioon | AC-pinge süsteemile |
| Kõrgus | 90 mm |
| Sügavus | 67.5 mm |
| Nimisagedus | 45-440 Hz |
| Eemaldatavate klambritega | Yes |
| Liini võimsus | 60 µF |
| Isolatsioonitakistuse näit | No |
| Võimalik on vigade registreerimine | No |
| Elektriühenduse liik | Kruviühendus |
| Tunnuspinge | 0-600 V |
| Juhtahelate tunnus-toitepinge, AC 50 Hz | 110-415 V |
| Juhtahelate tunnus-toitepinge, AC 60 Hz | 110-415 V |
| Juhtahelate tunnus-toitepinge, DC | 125-250 V |
| Näivtakistuse 1 väärtus | 2-500 kOhm |
| Näivtakistuse 2 väärtus | 1-250 kOhm |
| Aktiveerimispinge liik | AC/DC |
| Normaalselt suletud kontaktide arv | 0 |
| Normaalselt avatud kontaktide arv | 0 |
| Ümberlülituskontaktide arv | 1 |
Pakendamise üksikasjad
| Pakkimistase 1 | 3606480321658 |
| Pakkimistase 2 | 3606480321655 |
Allalaadimised
Kirjeldus
This device belongs to the Vigilohm range designed to monitor ungrounded/IT electrical networks, in accordance to installation and products standards. According to standards, it is recommanded to equip your systems with Insulation Monitoring Devices (IMD). This device is dedicated to monitoring pure AC systems of limited size, with low disturbances. It mesures the system insulation resistance by injecting a DC current between the network and ground. Configuration will be set depending on the installation. Settings are available on the front of the device. Settings are alarm and pre-alarm thresholds. It is equipped with a manual auto-test. In case the system insulation resistance drops below the set threshold, meaning a ground fault occurred, an alarm is triggered thru the IMD output relay. Once no fault is monitored, the alarm is cleared, the alarm relay is back to normal. This product can be installed on DIN rail.