1 channel DALI LED dimmer 8A for flush-mounted box

Prekės būklė	Nauja
Gamintojo pavadinimas	1 channel DALI LED dimmer 8A for flush-mounted box
Prekės ženklas	ELTAKO
Kategorijos	Jungikliai
Kilmės šalis	BG
Suderintos sistemos kodas	8542 3190 00
Kompleksinio bloko išdėstymas	Pagrindinis elementas
Veikimo metodas	Paspaudžiamas mygtukas
Nominali įtampa nuo / iki	12-48 V
Tinka apsaugos laipsniui (IP)	IP20
Įrenginio plotis	33 mm
Įrenginio aukštis	59 mm
Įrenginio gylis	15 mm
Maks. perjungimo maitinimo šviesos diodas	384 W

Pakavimo lygis 1

4010312321515, 4010312321515

Montavimo metodas	Kita
Spalva	Pilkas
Be halogeno	Yes
Jungties tipas	Kištuko gnybtas
Paviršiaus apdorojimas	Neapdorotas
Medžiagos kokybė	Termoplastikas
Medžiaga	Plastikinis
Šviesos vertės atmintis	Yes
Pastotės įvestis	No
Nuoseklioji užtamsinimo sistema	No
Naudotinas su judesio davikliu	No
Naudotinas su perdavimo mygtuku	No
Naudotinas su infraraudonųjų spindulių mygtuku	No
Naudotinas su buvimo rodmeniu	No
Naudotinas su mygtuku	Yes
Naudotinas su laiko jungikliu / laikmačiu	No
Kontrolinė įtampa nuo / iki	9.5-22.5 V
Permatomas	No
Paviršiaus tipas	Kilimėlis
Šerdies kryžminė sekcija nuo / iki	1.5 mm²
Galimas IFTTT palaikymas	No
Neryškus fazės nutrūkimas	No
Neryškus fazės dalijimas	No
Mažiausias įmontuoto įrenginio gylis	15 mm
App valdymas per Bluetooth	No
Vardinės galios apkrova	384 W
Suderinamas su Apple HomeKit	No
Suderinamas su Google Assistant	No
Suderinamas su Amazon Alexa	No

1 channel DALI LED dimmer for luminary installation and flush-mounted box. 59x33x15mm. Protection class IP20. Only 0.12 watt standby loss. Designed to control constant voltage LED modules (CV) at operating voltages of 12V to 48V, Sw&Dim or SwitchDim2: Operation via 1 or 2 pushbutton inputs permits brightness control without DALI. Alternatively, corridor function for direct activation with a motion detector. Dimming range 0.1%-100%. Switchable PWM frequency (122Hz/244Hz/488Hz/976Hz). Supply voltage 12V to 48V DC. Max. connected current 8A. High efficiency. Configuration via DALI Cockpit PC software and DALI USB interface. Operating modes: The output channel is controlled by a DALI address (Device Type 6). Alternatively, operation can also take place by one (Sw&Dim) or two pushbutton inputs (SwitchDim2). SwD1, Sw&Dim: brightness. Press pushbutton briefly: On/Off. Press pushbutton long: Dim. SwD2: Scene switch (press pushbutton briefly). If you press the SwD1 input for 2 minutes, the mode changes to Corridor function. This operating mode remains enabled until the device is disconnected from the power supply (after PowerUp: operation via SwD1/SwD2). Corridor function: Mode with integrated staircase time switch (e.g. simple activation of one or several motion detectors by relay contact). When you press the input, the maximum value is switched on. After the input signal decays, the brightness remains at this value for the duration of the hold time before it drops down to the intermediate value. After the hold time for the intermediate value expires, brightness returns to the basic value. The process starts from the beginning when the input is re-activated. The DALI Cockpit software can configure 1-channel LED dimmers. You can define both group assignment and configure scene values and DALI parameters (the parameters displayed are the as-delivered states). As-delivered state: Before the first address is assigned, you can control the device using the group address G0. This preset group assignment is deleted when addresses are assigned. Afterwards, you can define any group assignment in the DALI Cockpit. The values defined in the DALI standard are generated by sending a DALI reset command.