DALI relay module 16A for DIN-EN 60715 TH35 rail mounting (DT7)
Sandėlyje esančios prekės kaina (be PVM):
143,24 €
Ši kaina galioja iki 2024-12-31
Kaina už m:
143,24 €
EAN: 4010312324042
MPN: 33000006
Mūsų sandėlis:
Ne
Pardavėjo atsargos:
Ne
Už pakuotę:
1
Už dėžę:
1
Už padėklą:
N/A
Techniniai duomenys
| Prekės būklė | Nauja |
| Gamintojo pavadinimas | DALI relay module 16A for DIN-EN 60715 TH35 rail mounting (DT7) |
| Prekės ženklas | ELTAKO |
| Kategorijos |
Jutikliai |
| Kilmės šalis | CN |
| Suderintos sistemos kodas | 8542 3190 00 |
| Montavimo metodas | DRA |
| Nustatyta srovė | 16 A |
| Išeigos galia | 2000 W |
| Nominali operacinė įtampa | 230 V |
| EIB / KNX magistralės sistema | No |
| Magistralės sistemos radijo dažnis | No |
| „Powernet“ magistralės sistema | No |
| Maks. perjungimo galia | 2000 W |
| Įtraukta magistralės jungtis | Yes |
| Maks. perjungiamų kontaktų skaičius | 1 |
| Maks. perjungimo srovė | 16 A |
| Kitos maršrutinės sistemos | Kita |
| LON magistralinė sistema | No |
| C apkrova | No |
| Prijungiamas prie skirtingų fazių | No |
| Lokali operacija / rankos operacija | No |
| Saugos laipsnis (IP) | IP20 |
| Su LED rodmeniu | Yes |
| Modulinis praplečiamumas | No |
| KNX radijo magistralės sistema | No |
| Dvikryptis radijas | No |
| Nuimamas magistralės (šynos) modulis | No |
| Maks. perjungimo maitinimo šviesos diodas | 2000 W |
Pakavimo informacija
| Pakavimo lygis 1 | 4010312324042, 4010312324042 |
Downloads
Aprašymas
Module to control a relay contact over the DALI bus (DT7) for DIN top-hat rails DIN-EN 60715 TH35. 98x17,5x56mm. Protection class IP20. DALI current consumption 2.7mA. Compact relay module for direct control of 230V loads over DALI. Loads without DALI input are easily integrated in a DALI circuit. Loads can be switched on/off by DALI commands. The device function complies with the standard for DALI Device Type 7 – switching function (as of Firmware 2.0). Adjustable characteristic for power-up and bus power failure. The DALI RM16 is powered over the DALI bus. No additional power supply is required. Zero passage switch-on. Integrated power-on current limit, particularly suitable for loads with very high power-on current (>100A). The interface represents a bus user and is therefore addressable. Configuration via DALI Cockpit PC software. DALI functions and command set: The DALI RM16 can integrate loads on the DALI bus and can then switch them on/off. The DALI RM16 is a control device for non-dimmable loads based on the DALI specifications in IEC 62386-208 (Device Type 7). Accordingly, the switch characteristic is determined by comparing the virtual dim level (VDAP) with 4 switching thresholds. The virtual dim level (VDAP) corresponds to the dim level of a DALI electronic ballast with its corresponding characteristics (limited by MINLEVEL and MAXLEVEL, dimming speed limited by fade time and fade rate). There are 2 switching thresholds in each dimming direction and they are used for comparison with the virtual dim level. Only the applicable switching threshold for the current virtual dimming direction is evaluated. A threshold with the value MASK is inactive and is not used in the comparison. Switch-on/off delays can be implemented with fading. The DALI RM16 is powered from the DALI bus. The relay response to a bus power failure can be configured by the SystemFailureLevel (no change, ON or OFF, factory setting: ON). The power-on response after applying bus power can be set with PowerOnLevel.