DALI relay module 16A for DIN-EN 60715 TH35 rail mounting (DT7)
In stock price (excl. VAT):
143,24 €
This price is valid until 2024-12-31
Price per m:
143,24 €
EAN: 4010312324042
MPN: 33000006
Our warehouse:
No
Vendor stock:
No
Per package:
1
Per box:
1
Per pallet:
N/A
Technical data
| Item condition | New |
| Manufacture name | DALI relay module 16A for DIN-EN 60715 TH35 rail mounting (DT7) |
| Brand | ELTAKO |
| Categories |
Sensors |
| Country of origin | CN |
| Harmonized System Code | 8542 3190 00 |
| Mounting method | DRA (DIN-rail adapter) |
| Rated current | 16 A |
| Output power | 2000 W |
| Rated operating voltage | 230 V |
| Bus system KNX | No |
| Bus system radio frequent | No |
| Bus system Powernet | No |
| Max. switching power | 2000 W |
| With bus connection | Yes |
| Max. number of switching contacts | 1 |
| Max. switching current | 16 A |
| Other bus systems | Other |
| Bus system LON | No |
| Suitable for C-load | No |
| Different phases connectable | No |
| Local operation/hand operation | No |
| Degree of protection (IP) | IP20 |
| With LED indication | Yes |
| Modular expandability | No |
| Bus system KNX radio | No |
| Radio frequent bidirectional | No |
| Bus module detachable | No |
| Max. switching power LED | 2000 W |
Packing details
| Packing level 1 | 4010312324042, 4010312324042 |
Downloads
Description
Module to control a relay contact over the DALI bus (DT7) for DIN top-hat rails DIN-EN 60715 TH35. 98x17,5x56mm. Protection class IP20. DALI current consumption 2.7mA. Compact relay module for direct control of 230V loads over DALI. Loads without DALI input are easily integrated in a DALI circuit. Loads can be switched on/off by DALI commands. The device function complies with the standard for DALI Device Type 7 – switching function (as of Firmware 2.0). Adjustable characteristic for power-up and bus power failure. The DALI RM16 is powered over the DALI bus. No additional power supply is required. Zero passage switch-on. Integrated power-on current limit, particularly suitable for loads with very high power-on current (>100A). The interface represents a bus user and is therefore addressable. Configuration via DALI Cockpit PC software. DALI functions and command set: The DALI RM16 can integrate loads on the DALI bus and can then switch them on/off. The DALI RM16 is a control device for non-dimmable loads based on the DALI specifications in IEC 62386-208 (Device Type 7). Accordingly, the switch characteristic is determined by comparing the virtual dim level (VDAP) with 4 switching thresholds. The virtual dim level (VDAP) corresponds to the dim level of a DALI electronic ballast with its corresponding characteristics (limited by MINLEVEL and MAXLEVEL, dimming speed limited by fade time and fade rate). There are 2 switching thresholds in each dimming direction and they are used for comparison with the virtual dim level. Only the applicable switching threshold for the current virtual dimming direction is evaluated. A threshold with the value MASK is inactive and is not used in the comparison. Switch-on/off delays can be implemented with fading. The DALI RM16 is powered from the DALI bus. The relay response to a bus power failure can be configured by the SystemFailureLevel (no change, ON or OFF, factory setting: ON). The power-on response after applying bus power can be set with PowerOnLevel.