Wireless universal dimming actuator

Prekės būklė	Nauja
Gamintojo pavadinimas	Wireless universal dimming actuator
Prekės ženklas	ELTAKO
Kategorijos	Jungikliai
Kilmės šalis	CN
Suderintos sistemos kodas	8526 9200 00
Montavimo metodas	Apatinis sluoksnis (tinko)
Spalva	Mėlynas
Be halogeno	Yes
Paviršiaus apdorojimas	Kita
Srovės tiekimas	Kita
Tinka jungikliui	No
Tinka impulsiniam mygtukui	No
Tinka tamsinimo sistemai	Yes
Tinka suvyniojamos uždangos jungikliui	No
Medžiagos kokybė	Termoplastikas
Medžiaga	Plastikinis
Tvirtinimo tipas	Kita
Ritininio kodo sistema	Yes
Komandų skaičius	32
Radijo dažnis	868 MHz
Korpuse	Yes
Vamzdžio bazės korpuse	No
Štampuojama grandinės plokštė / modulis	No
Paspaudimo mygtuko režimas	Yes
Perjungimo režimas	No
Su rankiniu radijo siųstuvu	No
Su radijo kodavimo įrenginiu	No
Su radijo bangomis valdomu paspaudžiamu mygtuku	No
Tinka su pakeliamų žaliuzių / suvyniojamos uždangos jungikliu	No
Tinka pakeliamų žaliuzių uždangos jungikliui	No
Permatomas	No
Paviršiaus tipas	Kilimėlis
Tinka apsaugos laipsniui (IP)	IP20
Galimas IFTTT palaikymas	No
Suderinamas su Apple HomeKit	Yes
Suderinamas su Google Assistant	No
Suderinamas su Amazon Alexa	No

Pakavimo lygis 1	4010312320723, 4010312320723
Pakavimo lygis 2	4010312320723
Pakavimo lygis 3	4010312320723

Wireless universal dimming actuator. With power MOSFET. 230V incandescent lamps and halogen lamps up to 300W depending on ventilation conditions. Dimmable 230V LED lamps in 'phase cut-out' mode up to 300W or in phase control mode up to 100W ­depending on ventilation conditions. With children‘s rooms and snooze function. No minimum load. Only 0.9 watt standby loss. For installation. 49x51mm, 23mm deep. The terminals are plug-in terminals for conductor cross-sections of 0.2mm2 to 2.5mm2. Up to 32 wireless universal pushbuttons, wireless direction pushbuttons and wireless central control pushbuttons can be taught in using easy tap technology. In its as-delivered state the wireless universal dimming actuator is set to a universal dimming actuator (AUTO) and dimming takes place at the trailing or leading phase angle depending on the connected load. The dimming function is enhanced with various 230V LED lamps if dimming takes place at the leading phase angle. You can switch on bidirectional wireless and/or a repeater function. Zero passage switching with soft ON and soft OFF to protect lamps. Supply voltage, switching voltage and control voltage local 110-240V. The brightness level is stored on switch-off (memory). If supply voltage fails, the device is ­switched off in defined mode. Automatic electronic overload protection and overtemperature switch-off. In addition to the wireless control input via an internal antenna, this wireless actuator can also be controlled locally by a conventional 230V control switch if fitted previously. Glow lamp ­current is not permitted. On request the independent IP address permits remote access over the internet as the device is an IoT FUD64 product of the latest generation. Bluetooth is also incorporated. When operated in offline mode, Wi-Fi, Bluetooth and EnOcean can be completely disabled. Future firmware updates can be loaded per ­Wi-Fi via smartphone or the internet. All settings can be backed up and then loaded to other actuators of the same type as required. This actuator is Apple-certified and can therefore be taught-in to Apple HomeKit. It can also be taught-in to actuators in Google Assistant, Amazon Alexa and other systems after a firmware update. The Eltako app makes setting, triggering and controlling Smart Home functions by smartphone much faster and simpler.