Technical Information
Toote seisukord |
Uus |
Tootja nimi |
Wireless universal dimming actuator |
Bränd |
ELTAKO
|
Kategooriad |
Lülitid
|
Päritoluriik |
CN |
Harmoneeritud süsteemi kood |
8526 9200 00
|
Paigaldusviis |
Süvistatud paigaldus (krohvi) |
Värvus |
Sinine |
Halogeenivaba |
Yes |
Pinnatöötlus |
Muul viisil |
Toide |
Muul viisil |
Sobib lülitamiseks |
No |
Sobib impulsslülitiks |
No |
Sobib hämardamiseks |
Yes |
Sobib rullsulguri lülitiks |
No |
Materjal |
Termoplastist |
Materjal |
Plast |
Kinnitusviis |
Muul viisil |
Muutuva koodisüsteemiga |
Yes |
Käskude arv |
32 |
Raadiosagedus |
868 MHz |
Kestas |
Yes |
Torukujulises keres |
No |
Trükiplaat/moodul |
No |
Nupplülitusmoodus |
Yes |
Lülitusmoodus |
No |
Käsiraadiosaatja |
No |
Raadiosignaali kodeerimisseade |
No |
Raadiosignaaliga juhitava nupplülitiga |
No |
Sobib ribikardinate lülitiks |
No |
Sobib ribikardinate sulgemiseks |
No |
Läbipaistev |
No |
Pinna liik |
Matt |
Sobib vastava kaitseastme (IP) korral |
IP20 |
Saadaval on rakenduste IFTTT sobitustugi |
No |
Compatible with Apple HomeKit |
Yes |
Compatible with Google Assistant |
No |
Compatible with Amazon Alexa |
No |
Pakendamise üksikasjad
Pakkimistase 1 |
4010312320723, 4010312320723 |
Pakkimistase 2 |
4010312320723 |
Pakkimistase 3 |
4010312320723 |
Kirjeldus
Wireless universal dimming actuator. With power MOSFET. 230V incandescent lamps and halogen lamps up to 300W depending on ventilation conditions. Dimmable 230V LED lamps in 'phase cut-out' mode up to 300W or in phase control mode up to 100W depending on ventilation conditions. With childrens rooms and snooze function. No minimum load. Only 0.9 watt standby loss. For installation. 49x51mm, 23mm deep. The terminals are plug-in terminals for conductor cross-sections of 0.2mm2 to 2.5mm2. Up to 32 wireless universal pushbuttons, wireless direction pushbuttons and wireless central control pushbuttons can be taught in using easy tap technology. In its as-delivered state the wireless universal dimming actuator is set to a universal dimming actuator (AUTO) and dimming takes place at the trailing or leading phase angle depending on the connected load. The dimming function is enhanced with various 230V LED lamps if dimming takes place at the leading phase angle. You can switch on bidirectional wireless and/or a repeater function. Zero passage switching with soft ON and soft OFF to protect lamps. Supply voltage, switching voltage and control voltage local 110-240V. The brightness level is stored on switch-off (memory). If supply voltage fails, the device is switched off in defined mode. Automatic electronic overload protection and overtemperature switch-off. In addition to the wireless control input via an internal antenna, this wireless actuator can also be controlled locally by a conventional 230V control switch if fitted previously. Glow lamp current is not permitted. On request the independent IP address permits remote access over the internet as the device is an IoT FUD64 product of the latest generation. Bluetooth is also incorporated. When operated in offline mode, Wi-Fi, Bluetooth and EnOcean can be completely disabled. Future firmware updates can be loaded per Wi-Fi via smartphone or the internet. All settings can be backed up and then loaded to other actuators of the same type as required. This actuator is Apple-certified and can therefore be taught-in to Apple HomeKit. It can also be taught-in to actuators in Google Assistant, Amazon Alexa and other systems after a firmware update. The Eltako app makes setting, triggering and controlling Smart Home functions by smartphone much faster and simpler.