Merten KNX - Energy meter - 3 x 230 V - 16 A

Prekės būklė	Nauja
Gamintojo pavadinimas	Merten KNX - Energy meter - 3 x 230 V - 16 A
Prekės ženklas	Schneider Electric
Kategorijos	Jutikliai
Kilmės šalis	DE
Modelis	Energijos matuoklis
Jungties tipas	Direct
EIB / KNX magistralės sistema	Yes
Magistralės sistemos radijo dažnis	No
„Powernet“ magistralės sistema	No
Tarifų jungiklis	Yes
S0 impulsų sąsaja	Nėra
Reaktyvi energija	No
Tikslumo klasė	1
Aprobuota pagal PTB	No
Kitos maršrutinės sistemos	Nėra
LON magistralinė sistema	No
KNX radijo magistralės sistema	No
Dvikryptis radijas	No
Mažiausias įmontuoto įrenginio gylis	0 mm

Pakavimo lygis 1	3606480512261
Pakavimo lygis 2	3606480512269

Device for measuring and monitoring energy consumption at up to three channels. Different phases can be connected to the channels. The data is transmitted to the KNX bus for analysis and visualisation. There is a resettable energy counter and a total energy counter for each channel. The device saves the values in the event of a power failure. If one of up to 8 threshold values is exceeded, telegrams for energy-saving and alarm functions can be sent to different loads via the bus. The energy meter can receive energy values measured externally (e.g. from other energy meters or switch actuators with current detection) via the KNX bus and summate them. Suitable for installation on DIN rails TH35 according to EN 60715. With screw terminals. KNX software functions:. Functions per channel: Adjustable energy unit (Wh/kWh). Energy meter (resettable). Total energy meter. Adjustable transmission of power and current values. Energy-saving function: telegrams for saving energy. (switch object, value object, dimming object, scene object and temperature object) are sent when one of up to 8 threshold values is exceeded. 8 separately adjustable threshold values with tolerance (selectable via object). Adjustable tolerances and delays. Alarm function: alarms are sent when current values fall above or below threshold values. Adjustable tolerances and delays. Functions for all channels: Consumption values with time stamp. Time can be received via an external KNX timer. Adjustable nominal voltage (210-240 V). 4 energy counters to count seperatly depending on tariff. Summation of energy values from several channels and external energy values. Status responses regarding bus voltage failure, exceedance of power, total power and tariff meters. Energy measurement: Number of channels: 3. Nominal voltage: AC 220/230 V, 50/60 Hz. Max. current per channel: 16 A. Active energy measurement: Class 1. Detection accuracy: Power and current measurement (calculated): max. 10%. Capacity of total power meter: 2 million kWh. Temperature range: -5°C to + 45°C. IP protection rating: IP 20. Device width: 4 modules, approx. 72 mm. Colour: light grey.