Technical Information
Item condition |
New |
Manufacture name |
Merten KNX - Energy meter - 3 x 230 V - 16 A |
Brand |
Schneider Electric
|
Categories |
Sensors
|
Country of origin |
DE |
Model |
Energy meter |
Connection type |
Direct |
Bus system KNX |
Yes |
Bus system radio frequent |
No |
Bus system Powernet |
No |
Tariff switch |
Yes |
S0 impulse interface |
None |
Reactive power |
No |
Accuracy class |
1 |
Approved according to PTB |
No |
Other bus systems |
None |
Bus system LON |
No |
Bus system KNX radio |
No |
Radio frequent bidirectional |
No |
Min. depth of built-in installation box |
0 mm |
Packing details
Packing level 1 |
3606480512261 |
Packing level 2 |
3606480512269 |
Downloads
Description
Device for measuring and monitoring energy consumption at up to three channels. Different phases can be connected to the channels. The data is transmitted to the KNX bus for analysis and visualisation. There is a resettable energy counter and a total energy counter for each channel. The device saves the values in the event of a power failure. If one of up to 8 threshold values is exceeded, telegrams for energy-saving and alarm functions can be sent to different loads via the bus. The energy meter can receive energy values measured externally (e.g. from other energy meters or switch actuators with current detection) via the KNX bus and summate them. Suitable for installation on DIN rails TH35 according to EN 60715. With screw terminals. KNX software functions:. Functions per channel: Adjustable energy unit (Wh/kWh). Energy meter (resettable). Total energy meter. Adjustable transmission of power and current values. Energy-saving function: telegrams for saving energy. (switch object, value object, dimming object, scene object and temperature object) are sent when one of up to 8 threshold values is exceeded. 8 separately adjustable threshold values with tolerance (selectable via object). Adjustable tolerances and delays. Alarm function: alarms are sent when current values fall above or below threshold values. Adjustable tolerances and delays. Functions for all channels: Consumption values with time stamp. Time can be received via an external KNX timer. Adjustable nominal voltage (210-240 V). 4 energy counters to count seperatly depending on tariff. Summation of energy values from several channels and external energy values. Status responses regarding bus voltage failure, exceedance of power, total power and tariff meters. Energy measurement: Number of channels: 3. Nominal voltage: AC 220/230 V, 50/60 Hz. Max. current per channel: 16 A. Active energy measurement: Class 1. Detection accuracy: Power and current measurement (calculated): max. 10%. Capacity of total power meter: 2 million kWh. Temperature range: -5°C to + 45°C. IP protection rating: IP 20. Device width: 4 modules, approx. 72 mm. Colour: light grey.