Weather-proof luminaires Tugra Prisms Grey ETDD 45W 6000lm Wide (W) IP66 IK03 3 SDCM

Prekės būklė	Nauja
Gamintojo pavadinimas	Weather-proof luminaires Tugra Prisms Grey ETDD 45W 6000lm Wide (W) IP66 IK03 3 SDCM
Prekės ženklas	TRILUX
Kategorijos	Sieniniai ir lubiniai šviestuvai
Kilmės šalis	ES
Korpuso spalva	Kita
Spalvos atkūrimo indeksas	20-39 (4 klasė)
Lempa	Kita
Smūgio stiprumas	IK00
Saugos laipsnis (IP)	Kita
Išspinduliavimo kampas (vertė)	Atviras spindulys/difuzinis

Pakavimo lygis 1	4018242654154, 4018242654154
Pakavimo lygis 2	4018242908059

Saugos klasė	Nėra
Lempos laikiklis	Kita
Jungties tipas	Kita
Įtampos tipas	Kintamoji srovė
Grotelių tipas	Kita
Įrenginio tipas	Elektrinis transformatorius
Korpuso medžiaga	Kita
Šviesos išvestis	Direct
Šviesos dalijimasis	Asimetriškas
Gaubto medžiaga	Kita
Šviesos spalva	Kita
Instaliacijos tipas	Tinka praeinamajai instaliacijai
Spalvinis darnumas (pagal McAdamso elipsę)	SDCM1
Foto biologinė sauga pagal EN 62471	Kita
NEMA apsaugos laipsnis	Kita
Kaitinimo bandymas pagal IEC 60695-2-11	Nėra
Šviesos skirstytuvas	Kita
Įmontuotos lemputės energijos efektyvumo klasė	Kita
Efektyvumo klasė energijos tiekiamos keičiamai lemputei	A
Aukščiausios energinio efektyvumo klasės keičiama lemputė	A
Keičiamos lempos žemiausia energijos efektyvumo klasė	A
Reguliuojama spalvų temperatūra	Ne
Reguliuojamas šviesos srautas	Ne
Reguliuojamas spindulio kampas	Ne
Gyvenamojo namo paviršiaus apsauga	Kita

Multi-variable and modern tube luminaire with 75 mm profile diameter. With limited surface temperature, suitable for use in fire hazardous areas according to DIN EN 60598-2-24. For wall and ceiling mounting. Standard stainless steel mounting clips (2 pieces, V2A) with triangle included in the scope of supply. Optional accessories enable further mounting concepts. As single luminaire or for continuous line use. The continuous mounting channel of the luminaire body enables very high flexibility in positioning the fixing points. The packaging is made of recyclable cardboard, plastic-free. Multiple packaging with 28 luminaires as well as project packaging with 108 luminaires per packaging unit further reduce the general consumption of resources in the overall process. Cylindrical profile with photometrically effective prismatic structure as secondary optic. With opal profile area above and translucent profile area below the mounting channel. With symmetric wide light intensity distribution. With mainly direct light distribution. With slight indirect component for surface illumination. Luminaire luminous flux and light color fixed. Luminaire luminous flux 6000 lm, connected load 45 W, maximum luminous efficiency of luminaire 133 lm/W. Light colour neutral white, correlated colour temperature (CCT) 4000 K, general colour rendering index (CRI) Ra > 80. Colour locus tolerance (initial MacAdam) ≤ 3 SDCM. Mean rated service life L80(tq 25 °C) = 50,000 h. The light source is replaceable according to the ecodesign requirements (VO (EU) 2019/2020). PMMA luminaire profile. End cap colour gray (RAL 7035). End cap made of thermoplastically fused ASA / TPE with high-quality, matt surface structure and surface finish according to VDI30. The end cap is equipped with 3 self-sealing membranes for cable cross-sections 7 mm - 13 mm as well as 3 pre-stamped feed points for PG cable glands (M20/M25) for protection rating-compliant infeed (IP66). The end cap is connected to the profile cylinder via a bayonet lock. Standard end caps included. Luminaire length 1568 mm, Luminaire height 75 mm, Ø Luminaire body 75 mm. The gear tray is fixed to the luminaire profile with transparent devices to avoid shadowing. Permissible ambient temperature (ta) -25 °C - 30 °C. Safety class (EN 61140): I, protection rating (DIN EN 60529): IP66, impact resistance level in accordance with IEC 62262: IK03, testing temperature of wire glow test in accordance with IEC 60695-2-11: 650 °C. Weight: 2,5 kg. The connection is made by means of a plug-in terminal with mains forwarding equipment. The barrier free cable duct inside the luminaire profile facilitates the insertion of optional through-wiring or alternative uses, e.g. installing network cables. The luminaire is suitable for operation on a 230V direct voltage supply grid (DC). With electronic transformer, digitally dimmable (DALI). Control gear unit according to DALI-2 standard (EN 62386). Luminaire is switchable and dimmable by means of touch functionality via DALI control terminals (Touch DIM). The control gear unit is replaceable in accordance with the ecodesign requirements (VO (EU) 2019/2020). The ENEC certification by an independent testing laboratory is in preparation. The luminaire can be equipped with the Monitoring Ready (MOR) functionality on request. The luminaire complies with the fundamental requirements of applicable EU regulations and product safety legislation and bears the CE symbol. The luminaire is also ENEC-certified by an independent testing authority. Luminaire available for 10 years, spare parts (LED module, control gear unit, optical system) for 15 years from date of invoice, subject to reasonable modifications in the interests of progress.