Weather-proof luminaires Tugra Prisms Grey ETDD 45W 6000lm Wide (W) IP66 IK03 3 SDCM

Toote seisukord	Uus
Tootja nimi	Weather-proof luminaires Tugra Prisms Grey ETDD 45W 6000lm Wide (W) IP66 IK03 3 SDCM
Bränd	TRILUX
Kategooriad	Seina- ja laevalgustid
Päritoluriik	ES
Kere värvus	Muul viisil
Värviesitusindeks	20-39 (klass 4)
Lamp	Muul viisil
Löögikindlus	IK00
Kaitseaste (IP)	Muul viisil
Valgusvoo nurk	Lahtine kiirgus / difusioon

Pakkimistase 1	4018242654154, 4018242654154
Pakkimistase 2	4018242908059

Kaitseklass	Puudub
Lambipesa	Muul viisil
Ühenduse liik	Muul viisil
Pinge liik	AC
Hajuti liik	Muul viisil
Juhtliidese tüüp	Elektrontrafo
Kere materjal	Muul viisil
Valgusjaotus	Otsene
Valgusjaotus	Asümmeetriline
Kattematerjal	Muul viisil
Valguse värvus	Muul viisil
Juhtmestiku liik	Suitable for through wiring
Värvi konsistents (McAdam'i ellips)	SDCM1
Fotobioloogiline ohutus standardi EN 62471 järgi	Muul viisil
Kaitseaste (NEMA)	Muul viisil
Süttivuskatse IEC 60695-2-11järgi	Puudub
Valguse hajutaja	Muul viisil
Sisseehitatud lambi energiatõhususe klass	Muul viisil
Sisseehitatud vahetatava lambi energiatõhususe klass	A
Vahetatava lambi suurim energiatõhususe klass	A
Vahetatava lambi väikseim energiatõhususe klass	A
Colour temperature adjustable	Ei
Luminous flux adjustable	Ei
Beam angle adjustable	Ei
Kere pinnakaitse	Muul viisil

Multi-variable and modern tube luminaire with 75 mm profile diameter. With limited surface temperature, suitable for use in fire hazardous areas according to DIN EN 60598-2-24. For wall and ceiling mounting. Standard stainless steel mounting clips (2 pieces, V2A) with triangle included in the scope of supply. Optional accessories enable further mounting concepts. As single luminaire or for continuous line use. The continuous mounting channel of the luminaire body enables very high flexibility in positioning the fixing points. The packaging is made of recyclable cardboard, plastic-free. Multiple packaging with 28 luminaires as well as project packaging with 108 luminaires per packaging unit further reduce the general consumption of resources in the overall process. Cylindrical profile with photometrically effective prismatic structure as secondary optic. With opal profile area above and translucent profile area below the mounting channel. With symmetric wide light intensity distribution. With mainly direct light distribution. With slight indirect component for surface illumination. Luminaire luminous flux and light color fixed. Luminaire luminous flux 6000 lm, connected load 45 W, maximum luminous efficiency of luminaire 133 lm/W. Light colour neutral white, correlated colour temperature (CCT) 4000 K, general colour rendering index (CRI) Ra > 80. Colour locus tolerance (initial MacAdam) ≤ 3 SDCM. Mean rated service life L80(tq 25 °C) = 50,000 h. The light source is replaceable according to the ecodesign requirements (VO (EU) 2019/2020). PMMA luminaire profile. End cap colour gray (RAL 7035). End cap made of thermoplastically fused ASA / TPE with high-quality, matt surface structure and surface finish according to VDI30. The end cap is equipped with 3 self-sealing membranes for cable cross-sections 7 mm - 13 mm as well as 3 pre-stamped feed points for PG cable glands (M20/M25) for protection rating-compliant infeed (IP66). The end cap is connected to the profile cylinder via a bayonet lock. Standard end caps included. Luminaire length 1568 mm, Luminaire height 75 mm, Ø Luminaire body 75 mm. The gear tray is fixed to the luminaire profile with transparent devices to avoid shadowing. Permissible ambient temperature (ta) -25 °C - 30 °C. Safety class (EN 61140): I, protection rating (DIN EN 60529): IP66, impact resistance level in accordance with IEC 62262: IK03, testing temperature of wire glow test in accordance with IEC 60695-2-11: 650 °C. Weight: 2,5 kg. The connection is made by means of a plug-in terminal with mains forwarding equipment. The barrier free cable duct inside the luminaire profile facilitates the insertion of optional through-wiring or alternative uses, e.g. installing network cables. The luminaire is suitable for operation on a 230V direct voltage supply grid (DC). With electronic transformer, digitally dimmable (DALI). Control gear unit according to DALI-2 standard (EN 62386). Luminaire is switchable and dimmable by means of touch functionality via DALI control terminals (Touch DIM). The control gear unit is replaceable in accordance with the ecodesign requirements (VO (EU) 2019/2020). The ENEC certification by an independent testing laboratory is in preparation. The luminaire can be equipped with the Monitoring Ready (MOR) functionality on request. The luminaire complies with the fundamental requirements of applicable EU regulations and product safety legislation and bears the CE symbol. The luminaire is also ENEC-certified by an independent testing authority. Luminaire available for 10 years, spare parts (LED module, control gear unit, optical system) for 15 years from date of invoice, subject to reasonable modifications in the interests of progress.