weather st. Plus KNX

Prekės būklė	Nauja
Prekės ženklas	Gira
Kategorijos	Jutikliai
Kilmės šalis	DE
Suderintos sistemos kodas	9015 8020 00
Modelis	Kita
EIB / KNX magistralės sistema	Yes
Magistralės sistemos radijo dažnis	No
„Powernet“ magistralės sistema	No
Įtraukta magistralės jungtis	No
Su šildytuvu	No
Skaitmeninių įvesčių skaičius	NA
Analoginė įvestis	No
Kitos maršrutinės sistemos	Nėra
LON magistralinė sistema	No
RAL numeris (gretimas)	0
Oro stotis	Yes
Saugos laipsnis (IP)	IP20
Su DCF77	No
Akustinis signalas	No
KNX radijo magistralės sistema	No
Dvikryptis radijas	-

Pakavimo lygis 1

4010337031185

Weather station Plus for KNX Features: The weather station for KNX records the wind speed, wind direction, precipitation, global radiation, temperature, twilight, relative humidity, air pressure and with four sensors the brightness in different directions. The maximum value of the brightness sensors, absolute humidity, perceived temperature and comfort are calculated using the measured data. An area of application is the automatic, weather-dependent shading system specifically for home use. The weather station monitors some of its own major functions and reports corresponding faults automatically via message objects on the bus. Monitoring of the applied voltage. The failure is reported via a communications object on the bus. With integrated bus coupler. Mounting outdoors on a pole or on the wall. The position of the installation site can be determined via GPS. Functions: Two limits with an adjustable hysteresis per sensor can be parameterised internally or specified as 8-bit or 16-bit values. The teach-in function enables the application of a current measured value to a limit. All limit objects have a parameterisable switch-on and switch-off delay. 16 logic gates (AND, AND with return, OR, Exclusive OR, NAND, NOR) with up to four inputs for external and internal 1-bit values. 4 blocking elements for blocking functions or manual operation. Automatic shading control system of up to 8 facades can be implemented with sun position-dependent tracking of the slats and hanging height control. All values can be output when values change and cyclically. The outputs of the blocking elements can be sent only if the value changes. Weather stations can be cascaded via the logic functions. This is recommended for expansion of functions (measuring the wind strength on different facades) or for significantly increased functional reliability through redundance. Notes : Measured values apply for the installation site. Deviations from other weather services are possible. All accuracy specifications of the measured values refer to the respective measurement range send value.