weather st. Plus KNX

Состояние товара	Новый
Бренд	Gira
Категории	Датчики
Страна происхождения	DE
Код гармонизированной системы	9015 8020 00
Модель	Другое
Шинная система KNX	Yes
Шинная система радио частая	No
Шинная система Powernet	No
С автобусным сообщением	No
С подогревом	No
Количество цифровых входов	NA
Аналоговый вход	No
Другие автобусные системы	Нет
Шинная система LON	No
RAL-номер (аналогичный)	0
Метеостанция	Yes
Степень защиты (IP)	IP20
С DCF77	No
Акустический сигнал	No
Шинная система Радио KNX	No
Радио частый двунаправленный	-

Уровень упаковки 1

4010337031185

Weather station Plus for KNX Features: The weather station for KNX records the wind speed, wind direction, precipitation, global radiation, temperature, twilight, relative humidity, air pressure and with four sensors the brightness in different directions. The maximum value of the brightness sensors, absolute humidity, perceived temperature and comfort are calculated using the measured data. An area of application is the automatic, weather-dependent shading system specifically for home use. The weather station monitors some of its own major functions and reports corresponding faults automatically via message objects on the bus. Monitoring of the applied voltage. The failure is reported via a communications object on the bus. With integrated bus coupler. Mounting outdoors on a pole or on the wall. The position of the installation site can be determined via GPS. Functions: Two limits with an adjustable hysteresis per sensor can be parameterised internally or specified as 8-bit or 16-bit values. The teach-in function enables the application of a current measured value to a limit. All limit objects have a parameterisable switch-on and switch-off delay. 16 logic gates (AND, AND with return, OR, Exclusive OR, NAND, NOR) with up to four inputs for external and internal 1-bit values. 4 blocking elements for blocking functions or manual operation. Automatic shading control system of up to 8 facades can be implemented with sun position-dependent tracking of the slats and hanging height control. All values can be output when values change and cyclically. The outputs of the blocking elements can be sent only if the value changes. Weather stations can be cascaded via the logic functions. This is recommended for expansion of functions (measuring the wind strength on different facades) or for significantly increased functional reliability through redundance. Notes : Measured values apply for the installation site. Deviations from other weather services are possible. All accuracy specifications of the measured values refer to the respective measurement range send value.