2CSK289601R1902 TR/U 1.1.CH - Transponder reader Chiara, MIFARE

Noliktavas cena (bez PVN):

137,63 €

Šī cena ir spēkā līdz 2024-12-24

Cena par m: 137,63 €

EAN: 8012542896012

MPN: 2CSK289601R1902

Mūsu noliktava: Nē Piegādātāja krājumi: Nē

Vienā iepakojumā: 1 Vienā kastē: N/A

Tehniskie dati

Preces stāvoklis	Jauns
Ražotāja nosaukums	2CSK289601R1902 TR/U 1.1.CH - Transponder reader Chiara, MIFARE
Zīmols	ABB
Kategorijas	Vadības ierīces slēdžiem un rozetēm

Iepakojuma informācija

Iepakojuma līmenis 1

8012542896012

Apraksts

The "transponder reader" is a flush-mounting device designed to realize access control systems with a communication support based on KNX bus. It is equipped with one relay (4A @24 V AC/DC) and one input to be used for connecting external conventional card-holder. The output can be programmed in three different ways: "Linked to access control", receiving in this case switching commands from the device itself (according to transponder card validation); being a standard KNX Switch actuator output, able to be controlled by every KNX standard devices; "linked to card-holder", that means that the relay is switched according to closing/opening internal input contact available on transponder reader. The bicolor (red-green) LED placed on the front of the device allow you to monitor device operation and can be also switched ON/OFF in the proper color according to KNX telegram (for example for DND/MUR purposes). The transponder reader can be configured with MiniMAC software in order to behave as transponder programming device. The transponder reader requires a 12...24 V AC/DC external power supply to ensure its operation even with bus voltage failure.