Technical Information
Preces stāvoklis |
Jauns |
Ražotāja nosaukums |
Analog input 2 way |
Zīmols |
EATON
|
Kategorijas |
Sensori
|
Izcelsmes valsts |
CZ |
Harmonizētās sistēmas kods |
8541 4900 00
|
Montāžas metode |
Citi |
Modelis |
Pamatnes modulis |
Ievadu skaits |
2 |
Autobusu sistēma KNX |
No |
Autobusu sistēmas radio bieži |
Yes |
Autobusu sistēma Powernet |
No |
Ar autobusa savienojumu |
Yes |
Ievades strāvas disks |
Yes |
Ieejas sprieguma piedziņa |
Yes |
Platums moduļu atstarpju skaitā |
2 |
Citas autobusu sistēmas |
xComfort |
Autobusu sistēma LON |
No |
Aizsardzības pakāpe (IP) |
IP20 |
Ar LED indikāciju |
Yes |
Autobusu sistēma KNX radio |
No |
Min. iebūvētās instalācijas kastes dziļums |
0 mm |
Iepakojuma informācija
Iepakojuma līmenis 1 |
4015081117987 |
Iepakojuma līmenis 2 |
9008790091148 |
Apraksts
The 2-fold analog inputs can record different measurement values (e.g.: air quality, humidity, wind direction, etc.) using universal sensors (0-10VDC, 0-20mA, 4-20mA) or the temperature (PT1000 sensor, 265643) and provide the comfortable electrical installation. The supply is carried out via a separate 24VDC power supply unit (110772 or 110773, not included as standard!!!). The 24VDC supply is fed through 2-fold at the analog input and is therefore available for supplying the active sensors. depending on the sensors connected, the correct settings must be carried out for each channel. Notice: check the load and correct supply of the sensors!!! Notice: for the precise measurement and displaying of the values, use a reference measuring device to record the offset and adjust the zOffsetz in MFR. The device is mounted in the junction or installation box. Attention!: Does not work with xComfort Bridge