Reģistrējieties, lai atbloķētu savas ekskluzīvās B2B cenas un sāktu iepirkties. Reģistrējieties tagad!
Analog monitoring relay, resistance monitoring from 2 to 200 kohm
Ir noliktavā: Nē
Piegādātāja krājumi: Jā
Minimālais pasūtījuma daudzums: 1
Cena (bez PVN):
59,02 €
par gab.
EAN: 4011209665293
MPN: 3UG4501-1AA30
Kaste: 1
Technical Information
| Preces stāvoklis | Jauns |
| Ražotāja nosaukums | Analog monitoring relay Fill level ... |
| Zīmols | Siemens |
| Kategorijas |
Releji |
| Izcelsmes valsts | CZ |
| Harmonizētās sistēmas kods | 8536 4190 00 |
| Platums | 22.5 mm |
| Augstums | 92 mm |
| Dziļums | 91 mm |
| Kaskādes | - |
| Ar noņemamām skavām | Yes |
| Elektrodu ieeju skaits | 1 |
| Regulējama reakcijas vērtības jutība | Yes |
| Elektriskā pieslēguma veids | Skrūvju savienojums |
| Nominālais vadības barošanas spriegums pie AC 50 Hz | 24 V |
| Nominālais vadības barošanas spriegums pie AC 60 Hz | 24 V |
| Nominālais vadības barošanas spriegums pie līdzstrāvas | 24 V |
| Maks. atļautais izslēgšanas aizkaves laiks | 10 s |
| Min. regulējams izslēgšanas aizkaves laiks | 0.5 s |
| Maks. atļautais darbības aizkaves laiks | 10 s |
| Min. regulējams darbības aizkaves laiks | 0.5 s |
| Fizikālās mērīšanas princips | Citi |
| Sprieguma veids iedarbināšanai | AC/DC |
| Kontaktu skaits kā parasti slēgtam kontaktam | 0 |
| Kontaktu skaits kā parasti atvērtam kontaktam | 0 |
| Kontaktpersonu skaits kā maiņas kontaktpersona | 1 |
Iepakojuma informācija
| Iepakojuma līmenis 1 | 4011209665293 |
Apraksts
Analog monitoring relay Fill level monitoring Resistance monitoring from 2 to 200 kohm 0vershoot and undershoot Supply voltage 24 V AC/DC 50 to 60 Hz DC and AC without galvanic isolation to measuring circuit 2-step or 1-step control Tripping delay 0.5 to 10 s 1 change-over contact screw terminal Successor product for 3UG3501-1AC20 Level monitoring relay with analog setting SIRIUS 3UG4 for level monitoring of conductive fluids to protect against overflow, dry running or leakage.
Worldwide use thanks to wide voltage supply range and international certificates. Device replacement possible without rewiring, thanks to removable terminals Can be flexibly adapted to various conductive liquids through analog setting of the sensitivity. Upstream or downstream function is selectable By means of the adjustable tripping delay time, it is also possible to compensate for shaft movements. Other resistance sensors can also be connected, e.g. suitable photoresistors, temperature sensors, position encoders based on resistors etc.
In addition to screw terminals, all the devices are also available with spring-type terminals for fast, maintenance-free and vibration-proof connection.
Available accessories include individually shortenable two-pole and 3-pole wire electrodes for easy mounting from above/below, as well as bow electrodes for installation from the side to allow higher filling levels and minimal space requirements. Additional accessories, such as unit labeling plates, push-in lugs and cover caps, are standardized for all relays.
SIRIUS relays - one range for every application.