Technical Information
Preces stāvoklis |
Jauns |
Ražotāja nosaukums |
Bus pushbutton in E-Design55, anthracite mat |
Zīmols |
ELTAKO
|
Kategorijas |
Gaismas slēdži
|
Izcelsmes valsts |
CN |
Harmonizētās sistēmas kods |
8526 9200 00
|
Montāžas metode |
Virsmas montāža (apmetums) |
Krāsa |
Antracīts |
Nesatur halogēnus |
Yes |
Virsmas aizsardzība |
Neapstrādāts |
Signāla pārraide |
Radiofrekvences (RF) |
Kanālu skaits |
4 |
Diapazons |
30 m |
Ar tālvadības pulti |
No |
Pie sienas stiprināms raidītājs |
Yes |
Piemērots slēdzim |
Yes |
Piemērots dimmeram |
Yes |
Piemērots kustību sensoram |
No |
Materiāla kvalitāte |
Termoplasts |
Materiāls |
Plastmasas |
Ar manuālo raidītāju |
No |
Piemērots Venēcijas slēģu slēdzim |
Yes |
RAL numurs (līdzīgs) |
7016 |
Caurspīdīgs |
No |
Virsmas apdare |
Matt |
Logu raidītājs |
No |
Piemērots indikācijas elementam |
Yes |
Ir pieejams IFTTT atbalsts |
No |
Savietojams ar Apple HomeKit |
No |
Savietojams ar Google palīgu |
No |
Savietojams ar Amazon Alexa |
No |
Iepakojuma informācija
Iepakojuma līmenis 1 |
4010312326152, 4010312326152 |
Iepakojuma līmenis 2 |
4010312326152 |
Lejupielādes
Apraksts
Bus 2- or 4-way pushbutton for single mounting or mounting into the E-Design55 switching system. 80x80, 15mm high. For connection to FTS14TG pushbutton gateway. Only 0.2 watt standby loss. With rocker and double rocker. Smart Home sensor. The scope of supply comprises a mounting base, an attachment frame with snapped-on electronics, a frame, a rocker and a double rocker. The double rocker permits entry of 4 evaluable signals, but the rocker allows only 2 signals. At the rear, a 20cm long red/black bus line is routed externally. Red terminal to BP, black to BN of a pushbutton gateway FTS14TG. Up to 30 bus switches and/or FTS61BTK pushbutton bus couplers can be connected to terminals BP and BN of an FTS14TG pushbutton gateway. The permitted maximum line length is 200m. The RLC device enclosed with the FTS14TG must also be connected to the terminals BP and BN on the bus switch or pushbutton bus coupler furthest away. A voltage of 29V DC is supplied to the connected B4 over a 2-wire pushbutton bus which is also used for data transfer. Please use only conventional bus or telephone lines. Confirmation telegrams from actuators are displayed by 4 resp. 2 yellow LEDs when the actuator IDs are entered by the PCT14 in the ID table of the FTS14TG. Use the sleeves in the 55mm socket box for screw mounting.