Technical Information
Preces stāvoklis |
Jauns |
Ražotāja nosaukums |
Cable connector class EA 180° |
Zīmols |
METZ CONNECT
|
Kategorijas |
Kabeļu vāciņi un savienotāji, skavas
|
Izcelsmes valsts |
CN |
Harmonizētās sistēmas kods |
8538 9099 00
|
Krāsa |
Sudraba |
Savienojuma veids |
Izolācijas nobīdes savienotājs |
Pārmeklēts |
Yes |
Piemērots apaļajam kabelim |
Yes |
Piemērots plakanam kabelim |
No |
Piemērots litz stieples vadītājam |
Yes |
Piemērots cietam kodolam |
Yes |
Savienotāja veids |
Citi |
AWG diapazons |
22-26 |
Caurspīdīgs |
No |
Nepieciešams īpašs instruments |
No |
Savietojams ar Grade2TV saskaņā ar XP-C 90-483 |
No |
Savietojams ar Grade3TV saskaņā ar XP-C 90-483 |
No |
Iepakojuma informācija
Iepakojuma līmenis 1 |
4251394607900 |
Iepakojuma līmenis 2 |
4251394607900 |
Apraksts
Cable connector for field assembly Class E, A for 8 wire cables (optionally also for 4 wire cables)Cable feed 180° continuous, to connect / extend / repair / relocate copper data cables up to Cat.7, Ain combination with Cat. 6, A or higher copper cables, class EA up to 500 MHz according to ISO/IEC 11801, DIN EN 50173 is fulfilledsuitable for 10GBit Ethernet (IEEE 802.3an), Remote Powering (PoE, PoE plus, UPoE and 4PPoE), HDBaseT, SAT-IP and AVoverIP, Compact design, length 46.6 mm x width 14.7 mm x height 22.6 mm, solid, one-piece and reusable housing refined with zinc die-casting, simplest confection - mounting without special tools, strain relief via snap-in clip directly on the loading piece, intelligent cable management in stuffer cap - also suitable for heavily twisted cables, shield connection and strain relief integrated, conductor assignment to T568A and T568B is directly printed on the stuffer cap, Simple extension or relocation of existing infrastructure C6, A modul through reusable loading pieceseasy connection of data cables AWG 26/1 to 22/1 (solid wire) and AWG 26/7 to 22/7 (stranded wire) to insulation displacement connectors (IDC), solid copper wire diameter 0.409 to 0.643 mm, stranded copper wire diameter 0.483 to 0.762 mm, suitable for cables with an overall diameter of 5.5 to 10 mm, fully shielded version according to DIN EN 50173