CONT 12A 1F+1O 208V 50/60

Ir noliktavā: Nē Piegādātāja krājumi: Nē Minimālais pasūtījuma daudzums: 1

Cena (bez PVN):

34,49 €

Šī cena ir spēkā līdz 24.12.24

EAN: 3389110290042

MPN: LC1D12LE7

Iepakojums: 1

Technical Information

Preces stāvoklis	Jauns
Ražotāja nosaukums	CONT 12A 1F+1O 208V 50/60
Zīmols	Schneider Electric
Kategorijas	Modulārie slēdži
Izcelsmes valsts	FR
Harmonizētās sistēmas kods	8536 4900 00
Moduļu versija	No
Nominālā darbības jauda pie AC-3, 400 V	5.5 kW
Parasti atvērto kontaktu skaits kā galvenais kontakts	3
Parasti slēgto kontaktu skaits kā galvenais kontakts	0
Papildu kontaktu skaits kā parasti atvērts kontakts	1
Papildkontaktu skaits kā parasti slēgts kontakts	1
Nominālā darba strāva Ti pie AC-3, 400 V	12 A
Nominālā darba strāva Ti pie AC-1, 400 V	25 A
Nominālais vadības barošanas spriegums pie AC 50 Hz	208 V
Nominālais vadības barošanas spriegums pie AC 60 Hz	208 V
Galvenās ķēdes elektriskā pieslēguma veids	Skrūvju savienojums
Sprieguma veids iedarbināšanai	AC
Nominālā darba strāva Ti pie AC-4, 400 V	7.5 A
Nominālā darbības jauda pie AC-4, 400 V	3 kW
Nominālā darbības jauda NEMA	0 kW

Iepakojuma informācija

Iepakojuma līmenis 1

3389110290042

Apraksts

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 12A inductive 3 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactors have both Horsepower and Kw motor rating for international acceptance. Contactor is rated for 3HP at 200-208VAC, 3HP at 240VAC, 7.5HP at 480VAC and 10HP at 600VAC three phase. Contactor is also rated for 0.5HP at 115VAC and 2HP at 240VAC single phase. When used with a 480VAC up to 35A circuit breaker, this contactor can have a SCCR up to 85kA. When used with up to a 600VAC 30A Class J or CC fuse, this contactor can have a SCCR up to 100kA. Contactor is supplied with a 208 VAC 50/60 Hz coil. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 3.03 inches tall, 1.77 inches wide and 3.39 inches deep. It weighs 0.72 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.