Reģistrējieties, lai atbloķētu savas ekskluzīvās B2B cenas un sāktu iepirkties. Reģistrējieties tagad!
SA/S12.16.6.2 Switch Actuator, 12-fold, 16 A, C-Load, Energy Function, MDRC
Ir noliktavā: Nē
Piegādātāja krājumi: Jā
Minimālais pasūtījuma daudzums: 1
Cena (bez PVN):
322,73 €
par gab.
EAN: 4016779067201
MPN: 2CDG110273R0011
Iepakojums: 1
Technical Information
| Preces stāvoklis | Jauns |
| Ražotāja nosaukums | DG/S1.64.5.1 DALI Gateway, Premium, 1-fold, MDRC |
| Zīmols | ABB |
| Kategorijas |
Sensori
|
| Harmonizētās sistēmas kods | 8537 1091 00 |
| Montāžas metode | DRA (adapteris uz DIN sliedes) |
| Autobusu sistēma KNX | Yes |
| Autobusu sistēmas radio bieži | No |
| Autobusu sistēma Powernet | No |
| Platums moduļu atstarpju skaitā | 4 |
| Citas autobusu sistēmas | Citi |
| Autobusu sistēma LON | No |
| Aizsardzības pakāpe (IP) | IP20 |
| Ar LED indikāciju | Yes |
| Autobusu sistēma KNX radio | No |
| Radio bieži divvirzienu | No |
Iepakojuma informācija
| Iepakojuma līmenis 1 | 4016779067201 |
Lejupielādes
Apraksts
Single-Master DALI Controller certificated acc. to DALI-2 (EN 62386). The device is used to control DALI or DALI-2 devices via ABB i-bus® KNX. Two DALI output for up to 64 DALI participants. DALI power supply is integrated. Control and status feedback is carried out via KNX per DALI participants (64), with lighting groups (16), together in broadcast or per scenes (16). DALI devices type DT1 (Self-contained emergency converter acc. EN 62386-202) and type DT8 (colour temperature Tc & RGB(W) acc. EN 62386-209) will be supported. Other DALI devices e.g., DT6 can be controlled via standard DALI commands acc. to EN 62386-102.
Extensive fault and error messages are available. Slave-, staircase-, force-, block- and scene-function are integrated. Colour can set and dim, HSV(W)-, Dim2Warm-, HCL-function, 4 sequencer per DALI output can be used. A standby switch-off in combination with a KNX switch actuator (e.g., SA/S) and the integration of the DALI Gateways into a load control system are possible. By means of KNX and DT1 converter different emergency tests (e.g., function and duration test) can be triggered, test results are transferred back to KNX.
For diagnostic use and individual change of the DALI address or group assignment a separate software tool (ABB i-bus® Tool) is available.