LED dimmer switch, Power MOSFET up to 4A

Preces stāvoklis	Jauns
Ražotāja nosaukums	LED dimmer switch, Power MOSFET up to 4A
Zīmols	ELTAKO
Kategorijas	Gaismas slēdži
Izcelsmes valsts	CN
Harmonizētās sistēmas kods	8536 5080 00
Montāžas izkārtojums	Citi
Darbības metode	Skārienkontroles poga
Slodzes veids	Citi
Nominālais spriegums	8-230 V
Ierīces platums	45 mm
Ierīces augstums	45 mm
Ierīces dziļums	18 mm

Iepakojuma līmenis 1	4010312109502, 4010312109502
Iepakojuma līmenis 2	4010312109502
Iepakojuma līmenis 3	4010312109502

Montāžas metode	Iebūvējams vienā līmenī (apmetums)
Krāsa	Zils
Nesatur halogēnus	Yes
Savienojuma veids	Skrūvējams termināls
Virsmas aizsardzība	Citi
Materiāla kvalitāte	Termoplasts
Materiāls	Plastmasas
Stiprinājuma veids	Montāža ar skrūvi
Gaismas vērtību atmiņa	Yes
Apakšstacijas ieeja	No
Sērijveida dimmer	No
Piemērojams ar kustību sensoru	No
Piemērojams ar pārraides pogu	No
Piemērojams ar infrasarkano pogu	No
Piemērojams ar klātbūtnes indikatoru	No
Piemērojams ar pogu	Yes
Piemērojams ar laika slēdzi/taimeri	No
Vadības spriegums	8-230 V
Caurspīdīgs	No
Virsmas apdare	Matt
Serdes šķērsgriezums	4 mm²
Ir pieejams IFTTT atbalsts	No
Aptumšošanas fāzes atslēgšana	No
Aptumšošanas fāzes pārslēgšana	No
Min. iebūvētās instalācijas kastes dziļums	18 mm
Lietotņu vadība, izmantojot Bluetooth	No
Savietojams ar Apple HomeKit	No
Savietojams ar Google palīgu	No
Savietojams ar Amazon Alexa	No

Power MOSFET for LED lamps 12-36V DC up to 4A, pulse width modulation PWM. Stand-by loss 0.1 Watt only. With adjustable minimum brightness and dimming speed. With switching operation for children's rooms and snooze function. For installation. 45mm long, 45mm wide, 18mm deep. Dimmer switch for R- and LED loads up to 4A depending on ventilation conditions. Zero passage switching with soft start and soft OFF to protect lamps. Supply voltage input 12 to 36V DC, depending on the connected LED illumination. A pulse resistant switching power supply unit is necessary. Universal control voltage 8..230V UC, electrically isolated from the supply voltage. Either direction pushbuttons can be connected to arrow up/arrow down or these terminals will be bridged and a pushbutton will be connected as an universal pushbutton. With universal pushbutton: short commands switch on/off, permanent control changes the brightness to the maximum. An interruption of the control changes the dimming direction. With direction pushbutton: switching and dimming on with arrow up, turning and dimming off with arrow down. A dual pulse with arrow up effects dimming on up to the maximum brightness with the set dimming speed (dimspeed). The set brightness level will be stored when turning off (Memory). In case of power failure the switching position and the brightness level will be stored and will be switched on when supply voltage recurs. Automatic electronic overload protection and overtemperature switch off. The LED indicates an activation by a short flickering. With the top rotary switch %lamp the minimum brightness level (completely dimmed down) can be adjusted. With the lower dim speed rotary switch, the dimming speed can be set. At the same time, soft-on and soft-off is changed. With switching operation for children's rooms (universal or direction pushbutton arrow up): if the light is switched on by holding down the pushbutton it starts at the lowest brightness level after approx. 1 second and dims up slowly as long as the pushbutton is pressed without modifying the latest stored brightness level. Snooze function (universal or direction pushbutton arrow down): with a double impulse the lighting is dimmed down from the current dimming position to the minimum brightness level and switched off. The current dimming position as well as the adjustable minimum brightness level determine the dimming time (max. = 60 minutes) which can be reduced as required. It can be switched off at any time by short-time control commands during the lighting is dimmed down. Holding down the pushbutton during the dimming down process dims up and stops the snooze function.