Sākums
ELTAKO
1- and 2-level outdoor wireless repeater

1- and 2-level outdoor wireless repeater

Noliktavas cena (bez PVN):

69,21 €

Šī cena ir spēkā līdz 2024-12-31

Cena par m: 69,21 €

EAN: 4010312310137

MPN: 30000353

Mūsu noliktava: Nē Piegādātāja krājumi: Nē

Vienā iepakojumā: 1 Vienā kastē: 1 Vienā paletē: N/A

Tehniskie dati

Preces stāvoklis	Jauns
Ražotāja nosaukums	1- and 2-level outdoor wireless repeater
Zīmols	ELTAKO
Kategorijas	Sensori
Izcelsmes valsts	CN
Harmonizētās sistēmas kods	8526 9200 00
Nominālais spriegums	230 V
Montāžas metode	Virsmas montāža (apmetums)
Autobusu sistēma KNX	No
Autobusu sistēmas radio bieži	Yes
Autobusu sistēma Powernet	No
Citas autobusu sistēmas	Nav
Autobusu sistēma LON	No
Aizsardzības pakāpe (IP)	IP54
Autobusu sistēma KNX radio	No

Iepakojuma informācija

Iepakojuma līmenis 1	4010312310137, 4010312310137
Iepakojuma līmenis 2	4010312310137
Iepakojuma līmenis 3	4010312310137

Downloads

Links uz ražotāju mājaslapu

Apraksts

Outside wireless repeater 1 and 2 levels, 60x46mm, 30mm deep. Only 0.7 watt standby loss. Supply voltage 230V. This repeater is only needed if the building conditions prevent undisturbed reception or the distance between the wireless pushbutton and receiver is too great. The 1-level mode is activated ex works. Only the signals from sensors and actuators are received, tested and retransmitted at full transmit power. Wireless signals from other repeaters are ignored to reduce the data volume. Switchover to 2-level mode is carried out by removing the cover (loosen two screws on the front panel) and repositioning the jumper flush right. In this setting, wireless signals from other 1-level repeaters are also processed. A signal may therefore be received and amplified twice. A red LED blinks briefly to indicate all the wireless signals detected. Wireless repeaters need not be taught-in. They receive and amplify signals from all wireless sensors within their reception area. On the underside there is an M12 screw for a waterproof mains connection. The protection class is IP54, the allowable ambient temperature is -20°C to +55°C. For screw mounting.