Technical Information
Preces stāvoklis |
Jauns |
Ražotāja nosaukums |
RS485 bus capacity enhancer for universal dimmer switch FUD14/800W |
Zīmols |
ELTAKO
|
Kategorijas |
Gaismas slēdži
|
Izcelsmes valsts |
CN |
Harmonizētās sistēmas kods |
8526 9200 00
|
Nominālais spriegums |
230 V |
Montāžas metode |
DRA (adapteris uz DIN sliedes) |
Krāsa |
Zils |
Nesatur halogēnus |
Yes |
Virsmas aizsardzība |
Citi |
Materiāla kvalitāte |
Termoplasts |
Slodzes veids |
Universālā |
Materiāls |
Plastmasas |
Savienota slodze |
300-400 W |
Caurspīdīgs |
No |
Virsmas apdare |
Matt |
Iepakojuma informācija
Iepakojuma līmenis 1 |
4010312313763, 4010312313763 |
Iepakojuma līmenis 2 |
4010312313763 |
Iepakojuma līmenis 3 |
4010312313763 |
Lejupielādes
Apraksts
Capacity enhancer for universal dimmer switch FUD14/800W, Power MOSFET up to 400W. Standby loss 0.1 watt only. Modular device for DIN EN 60715 TH35 rail mounting. 1 module = 18mm wide, 58mm deep. Capacity enhancers FLUD14 can be connected to the universal dimming actuator FUD14/800W. By this the switching capacity for one lamp will be increased up to 200W or alternatively for additional lamps up to 400W per each capacity enhancer. The two circuits to increase capacity can be created at the same time using several FLUD14s. Supply voltage 230V. No minimum load. Automatic electronic overload protection and over-temperature switch-off. The lamp type of a capacity enhancer FLUD14 in the Capacity increase with additional lamps may deviate from the lamp type of the universal dimmer switch FUD14/800W. It is therefore possible to mix capacitive and inductive loads.