Wireless flat pushbutton polar white glossy without battery or wire, with flat rocker and flat double rocker

Preces stāvoklis	Jauns
Ražotāja nosaukums	Wireless flat pushbutton polar white glossy without battery or wire, with flat rocker and flat double rocker
Zīmols	ELTAKO
Kategorijas	Gaismas slēdži
Izcelsmes valsts	DE
Harmonizētās sistēmas kods	8526 9200 00
Montāžas metode	Virsmas montāža (apmetums)
Krāsa	Citi
Nesatur halogēnus	Yes
Virsmas aizsardzība	Neapstrādāts
Signāla pārraide	Radiofrekvences (RF)
Kanālu skaits	4
Diapazons	30 m
Ar tālvadības pulti	No
Pie sienas stiprināms raidītājs	Yes
Piemērots slēdzim	Yes
Piemērots dimmeram	Yes
Piemērots kustību sensoram	No
Materiāla kvalitāte	Termoplasts
Materiāls	Plastmasas
Ar manuālo raidītāju	No
Piemērots Venēcijas slēģu slēdzim	Yes
RAL numurs (līdzīgs)	9010
Caurspīdīgs	No
Virsmas apdare	Glancēts
Logu raidītājs	No
Piemērots indikācijas elementam	Yes
Ir pieejams IFTTT atbalsts	No
Savietojams ar Apple HomeKit	No
Savietojams ar Google palīgu	No
Savietojams ar Amazon Alexa	No

Iepakojuma līmenis 1	4010312327593, 4010312327593
Iepakojuma līmenis 2	4010312327593

Wireless 4-way flat pushbutton, 80x80mm external dimensions, internal frame dimensions 63x63mm, 15mm high. Generates the power for wireless telegrams itself when the button is pressed, therefore there is no connecting wire and no standby loss. With rocker and double rocker. Smart Home sensor. The scope of supply comprises the frame R1F, a flat rocker WF, a flat double rocker DWF (all same colour), an attachment frame BRF, the mounting base HP, the wireless module and one adhesive foil. Wireless pushbuttons with one rocker can transmit two evaluable signals: press rocker up and press rocker down. Wireless pushbuttons with double rocker can transmit four evaluable signals: press two rockers up or down. The mounting base can be screwed onto a flat surface or glued to the wall, on glass or on furniture using the enclosed adhesive foil. Use the sleeves in the 55mm socket box for screw mounting. The double rocker is snapped onto the wireless module at the factory. If the double rocker is replaced by the large rocker, remove the rocker halves by pulling off to the front. Do not bend towards the middle. Then snap the large rocker so that the markings 0 and I on the back line up with the same markings on the wireless module. Adhesion: First adhere the set comprising the mounting base, frame and attachment frame with the latches pointing at the top and bottom. Then snap on the set comprising the wireless module and rocker - with the marking 0 on the back always pointing up. Before screwing, remove the mounting base from the frame and the attachment frame. To do this, press the latches on the mounting base outwards. Then screw the mounting base with the latches at top and bottom , snap on the frame with the attachment frame and snap on the set comprising the wireless module and rocker with the marking 0 on the back always pointing to the top. We recommend stainless-steel countersunk screws 2.9x25mm, DIN 7982 C, for screw ­connections. Both with rawl plugs 5x25mm and with 55mm switch boxes. The Eltako frame can be replaced on installation at any time by a design frame with internal dimensions 63x63mm from other manufacturers. The wireless module integrated in the wireless pushbutton can be taught-in encrypted as described in the operating instructions in all encryptable actuators of the Series 61 and Series 71 as well as the FAM14. This requires the FTVW wireless pushbutton encryption rocker. Encryptable actuators bear the key pictogram.