Reģistrējieties, lai atbloķētu savas ekskluzīvās B2B cenas un sāktu iepirkties. Reģistrējieties tagad!
RS485 bus weather data gateway for multi sensor MS
Ir noliktavā: Nē
Piegādātāja krājumi: Nē
Minimālais pasūtījuma daudzums: 1
Cena (bez PVN):
50,61 €
EAN: 4010312316887
MPN: 30014072
Iepakojums: 1
Technical Information
| Preces stāvoklis | Jauns |
| Ražotāja nosaukums | RS485 bus weather data gateway for multi sensor MS |
| Zīmols | ELTAKO |
| Kategorijas |
Sensori |
| Izcelsmes valsts | CN |
| Harmonizētās sistēmas kods | 8526 9200 00 |
| Montāžas metode | DRA (adapteris uz DIN sliedes) |
| Modelis | Vairāki interfeisi |
| Sprieguma veids | DC |
| Elektrības patēriņš | 0.3 W |
| Autobusu sistēma KNX | No |
| Autobusu sistēmas radio bieži | Yes |
| Autobusu sistēma Powernet | No |
| Platums moduļu atstarpju skaitā | 1 |
| Citas autobusu sistēmas | Citi |
| Autobusu sistēma LON | No |
| Demontāžas aizsardzība | No |
| Radio interfeiss | No |
| IR interfeiss | No |
| Protokols | Citi |
| Atkarīgs no pakalpojumu sniedzēja | No |
| Atjaunināms | No |
| Vizualizācija | No |
| Web serveris | No |
| Darba spriegums | 5 V |
| Aizsardzības pakāpe (IP) | IP20 |
| Ar LED indikāciju | No |
| Autobusu sistēma KNX radio | No |
| Radio bieži divvirzienu | No |
Iepakojuma informācija
| Iepakojuma līmenis 1 | 4010312316887, 4010312316887 |
| Iepakojuma līmenis 2 | 4010312316887 |
| Iepakojuma līmenis 3 | 4010312316887 |
Lejupielādes
Apraksts
Weather data gateway for multi sensor MS. Bidirectional. Only 0.3 watt standby loss. Modular device for DIN-EN 60715 TH35 rail mounting. 1 module = 18mm wide, 58mm deep. A multisensor MS at the gateway is connected to terminals RSA and RSB. The information is received once per second and converted into bus telegrams. However, several FWG14MS can be connected to a multisensor MS e.g. to control several Eltako RS485 buses with only one MS multisensor. Only at one FWG14MS must the end resistor connected. At additional FWG14MS, this resistor must be removed. Connection to the Eltako-RS485 bus. Bus cross wiring and power supply with jumper. Operation in conjunction with FAM14 or FTS14KS. The Hold terminal is connected to the FAM14 or the FTS14KS. A maximum of two FWG14MS devices can be operated in one bus. The telegram duplicator FTD14 can also send telegrams over the Wireless Building System after the IDs of the FGW14MS are taught in the FTD14 or entered using the PTC14. Receiving devices can then be FSB14, FSB61NP and FSB71. If the multisensor MS signal is not received, an alarm telegram is sent. Using the PC Tool PCT14, 96 inputs can be AND or OR linked and up to 12 outputs can be output. The BA operating mode rotary switch can be configured according to the operating instructions.