Wireless pull switch in E-Design65, pure white glossy

Preces stāvoklis	Jauns
Ražotāja nosaukums	Wireless pull switch in E-Design65, pure white glossy
Zīmols	ELTAKO
Kategorijas	Gaismas slēdži
Izcelsmes valsts	CN
Harmonizētās sistēmas kods	8526 9200 00
Montāžas metode	Virsmas montāža (apmetums)
Krāsa	Balts
Nesatur halogēnus	Yes
Virsmas aizsardzība	Citi
Signāla pārraide	Radiofrekvences (RF)
Kanālu skaits	1
Diapazons	30 m
Ar tālvadības pulti	No
Pie sienas stiprināms raidītājs	Yes
Piemērots slēdzim	Yes
Piemērots dimmeram	No
Piemērots kustību sensoram	No
Materiāla kvalitāte	Termoplasts
Materiāls	Plastmasas
Ar manuālo raidītāju	No
Piemērots Venēcijas slēģu slēdzim	No
RAL numurs (līdzīgs)	9016
Caurspīdīgs	No
Virsmas apdare	Matt
Logu raidītājs	No
Piemērots indikācijas elementam	Yes
Ir pieejams IFTTT atbalsts	No
Savietojams ar Apple HomeKit	No
Savietojams ar Google palīgu	No
Savietojams ar Amazon Alexa	No

Iepakojuma līmenis 1	4010312316139, 4010312316139
Iepakojuma līmenis 2	4010312316139

Wireless pull switch for surface mounting 84x84x24mm. With silver and red handle. Generates the power for wireless telegrams itself when the button is pressed, therefore there is no connecting wire and no standby loss. When the handle is pulled and released, a wireless telegram is sent to the Eltako ­wireless network. The scope of supply includes the completely assembled pull switch, a silver handle, a red handle and two screws and rawl plugs. Fitting by screwing: First dismantle the fully assembled pull switch. To do this, remove the screw, unhook the cover and remove the intermediate frame together with the rocker and transmitter module by loosening the retaining bars at the top and bottom. Fit the mounting plate by tightening the screws. Engage the frame together with the hook-in cut-outs at the top and the intermediate frame including the transmitter module and rocker with the rear ID 0 upwards. Insert the cover with the inserted cord into the top hook-in cut-outs of the frame and screw tight into the retaining plate using the screw at the bottom. Shorten the cord to the required length, push it through the red or silver handle and secure it by a double knot. Independent of position: The pull switch functions in any position, even when attached to the ceiling. Matching actuators: The wireless pull switch transmits the same wireless telegrams when operated as a wireless pushbutton and can therefore be taught-in in actuators and the GFVS software in the same way. If it will be taught-in in an actuator as central on as an emergency call switch the emergency can only be received with another taught-in switch with central off. The wireless module integrated in the wireless pull switch can be taught-in encrypted as described in the operating instructions in all encryptable actuators of the Series 61, 62 and 71 as well as FAM14. This requires the FTVW wireless pushbutton encryption rocker. Encryptable actuators bear the key pictogram.