Preces stāvoklis | Jauns |
Ražotāja nosaukums | Heating Mat 595W 0.5х7.0m 2.4A 230V THORGEON |
Zīmols | THORGEON |
Kategorijas |
Sildīšanas kabeļi un elektriskā virsmas apsilde |
Izcelsmes valsts | LV |
Harmonizētās sistēmas kods | 8516 8080 00 |
Modelis | Apsildes kabelis |
Jauda | 170 W/m² |
Biezums | 3.8 mm |
Pašlīmējošs | No |
Virsma | 3.5 m² |
Ar atbalsta paklājiņu | Yes |
Pretestība | 96 Ohm |
Ar kontrolieri | No |
Savienota slodze | 595 W |
Savienojuma spriegums | 230 V |
Piemērots kā āra virsmas apsilde | Yes |
Piemērots mitrai telpai | Yes |
Iepakojuma līmenis 1 | 4752280006765 |
Stranded heating conductors made of CuNi, CuCr, NiCr alloys depending on the resistance. Internal insulation made of heat-resistant extruded FEP. Aluminum foil screen. Drain conductor made of stranded Al-Mg wires. External insulation made of PVC-modified polyvinyl chloride with increased heat resistance. Synthetic fiberglass mesh 50cm wide. Cold lead 3.0m long (PVC 3×1.0mm2).
The thickness of the heating cable is only 3.6 mm, which allows to use the minimum thickness of the tile adhesive. The heating cable is securely sewn to an ultra-thin and durable synthetic mesh with a thickness of only 0.2 mm, which does not deform when laid out.
Maximum operating temperature: | +90⁰С |
Minimum installation temperature: | -10⁰С |
Cable outer diameter: | 3.6 mm |
Mat thickness | 3.8 mm |
Installation wire feeding the heating cable: | 3.0m, PVC 3x1.0mm² |
Color of connected wires: | brown - phase (L), blue - zero (N), yellow-green - "ground" (PE) |