Reģistrējieties, lai atbloķētu savas ekskluzīvās B2B cenas un sāktu iepirkties. Reģistrējieties tagad!
Analogue settable multifunction time relay, 1 NO contact 10A
Ir noliktavā: Nē
Piegādātāja krājumi: Nē
Minimālais pasūtījuma daudzums: 1
Cena (bez PVN):
41,33 €
EAN: 4010312603147
MPN: 23100530
Iepakojums: 1
Technical Information
| Preces stāvoklis | Jauns |
| Ražotāja nosaukums | Analogue settable multifunction time relay, 1 NO contact 10A |
| Zīmols | ELTAKO |
| Kategorijas |
Releji
|
| Izcelsmes valsts | CN |
| Harmonizētās sistēmas kods | 8536 5080 00 |
| Montāžas metode | DIN sliede |
| Funkcija | Daudzfunkcionāls |
| Iebūvētais augstums | 58 mm |
| Uzbudinājuma veids | Analogs ar vairākām funkcijām |
| Platums moduļu atstarpju skaitā | 1 |
| Pārslēgšanas slēdžu skaits | 0 |
| Vadības spriegums 1 | 230 V |
| Vadības sprieguma veids 1 | AC |
| Frekvences vadības spriegums 1 | 50 Hz |
| Barošanas sprieguma sprieguma veids | AC |
| Barošanas spriegums | 230 V |
| 1. intervāla vienība | Minūtes/ stundas |
| 1. intervāls | 0.1-40 |
| Nominālā pārslēgšanas strāva pie 250 V maiņstrāvas | 10 A |
| Slēdža jaudas kvēlspuldzes | 1000 W |
| Slēdža jaudas dienasgaismas spuldze DUO | 500 VA |
| Slēdža jaudas dienasgaismas spuldze induktīva | 500 VA |
| Slēdža jaudas dienasgaismas spuldze paralēli | 250 VA |
| Kontaktu skaits kā parasti slēgtam kontaktam | 0 |
| Kontaktu skaits kā parasti atvērtam kontaktam | 1 |
Iepakojuma informācija
| Iepakojuma līmenis 1 | 4010312603147, 4010312603147 |
| Iepakojuma līmenis 2 | 4010312603147 |
| Iepakojuma līmenis 3 | 4010312603147 |
Lejupielādes
Apraksts
1 NO contact potential free 10A/250V AC. 230V LED lamps up to 200W, incandescent lamps 1000W*. Standby loss 0.4 watt only. Modular device for DIN-EN 60715 TH35 rail mounting. 1 module = 18mm wide, 58mm deep. Control voltage 230V. Supply voltage same as control voltage. Time setting between 0.1 second and 40 hours. Functions F: RV = off delay. AV = operate delay. TI = clock generator starting with impulse. TP = clock generator starting with pause. IA = impulse controlled operate delay (e.g. automatic door opener). EW = fleeting NO contact. AW = fleeting NC contact. ARV = operate and release delay. ON = permanent ON. OFF = permanent OFF. The LED below the big rotary switch indicates the contact position while time-out is in progress. It blinks while the relay contact is open, and is continuously ON as long as the relay contact is closed. The time base T is selected by means of the middle, latching rotary switch T. Time-base figures available are 0.1 seconds, 0.5 seconds, 2 seconds, 5 seconds, 1 minute, 2 minutes, 5 minutes, 1 hour, 2 hours and 4 hours. The total time is obtained by multiplying the timebase by the multiplier. The multiplier xT is set on the upper, latching rotary switch xT and is in the range from 1 to 10. Thus, time settings can be selected in the range from 0.1 second (time base 0.1 second and multiplier 1) and 40 hours (time base 4 hours and multiplier 10). * The maximum load can be used starting at a delay time or clock cycle of 5 minutes. The maximum load will be reduced for shorter times as follows: up to 2 seconds 15%, up to 2 minutes 30%, up to 5 minutes 60%.