Digital settable multifunction time relay with display and Bluetooth, 1 CO contact 10A

Preces stāvoklis	Jauns
Ražotāja nosaukums	Digital settable multifunction time relay with display and Bluetooth, 1 CO contact 10A
Zīmols	ELTAKO
Kategorijas	Releji
Izcelsmes valsts	CN
Harmonizētās sistēmas kods	8536 4900 00
Montāžas metode	DIN sliede
Funkcija	Daudzfunkcionāls
Iebūvētais augstums	58 mm
Uzbudinājuma veids	Digitāls ar multifunkciju
Platums moduļu atstarpju skaitā	1
Pārslēgšanas slēdžu skaits	1
Vadības spriegums 1	12-230 V
Vadības sprieguma veids 1	AC/DC
Frekvences vadības spriegums 1	50 Hz
Barošanas sprieguma sprieguma veids	AC/DC
Barošanas spriegums	8-230 V
1. intervāla vienība	Minūtes/ stundas
1. intervāls	0.1-40
Slēdža jaudas kvēlspuldzes	2000 W
Slēdža jaudas dienasgaismas spuldze DUO	1000 VA
Slēdža jaudas dienasgaismas spuldze induktīva	1000 VA
Slēdža jaudas dienasgaismas spuldze paralēli	500 VA
Kontaktu skaits kā parasti slēgtam kontaktam	0
Kontaktu skaits kā parasti atvērtam kontaktam	0

Iepakojuma līmenis 1	4010312603284, 4010312603284
Iepakojuma līmenis 2	4010312603284
Iepakojuma līmenis 3	4010312603284

Digital settable multifunction time relay with display and Bluetooth with Eltako Connect app and 18 functions. 1 CO contact potential free 10A/250V AC. 230V LED lamps up to 200W, incandescent lamps 2000W. With display lighting. Standby loss 0.1-0.3 watt only. Modular device for DIN-EN 60715 TH35 rail mounting. 1 module = 18mm wide, 58mm deep. With the patented Eltako Duplex technology (DX) the normally potential-free contacts can still switch in zero passage when switching 230V AC 50Hz and therefore drastically reduce wear. Simply connect the neutral conductor to the terminal (N) and L to 15(L) for this. This gives an additional standby consumption of only 0.1 Watt. Universal control voltage 12 to 230V UC. Supply voltage same as the control voltage. Both functions and times are entered at the touch of a key and indicated digitally on an LC display. Only two keys are required for this purpose. When setting the time all values can be entered within preset time ranges (0.1 to 9.9 or 1 to 99 seconds, minutes or hours). The longest possible setting is 99 hours. 600 settings are possible. The time setting is continuously displayed digitally. Functions: RV = off delay. AV = operate delay. AV+ = operate delay additive. TI = clock generator starting with impulse. TP = clock generator starting with pause. IA = impulse controlled pickup delay (e.g. automatic door opener). IF = pulse shaper. EW = fleeting NO contact. AW = fleeting NC contact. EAW = fleeting NO contact and fleeting NC contact. ARV = operate and release delay. ARV+ = operate and release delay additive. ES = impulse switch. SRV = release-delay impulse switch. ESV = impulse switch with release delay and switch-off early-warning function. ER = relay. ON = permanent ON. OFF = permanent OFF. With TI, TP, IA, EAW, ARV and ARV+ functions, a different second time can be entered also with different time ranges. The time relay is set either via Bluetooth with the app or with the MODE and SET buttons, a button lock is possible. The display lighting is switched on by pressing MODE or SET for the first time. 20 seconds after you last press MODE or SET, the program returns automatically to normal display and the display illumination goes off. Connect the timer to the app: Press SET, the display shows BLE (Bluetooth) and the ID of the timer. The connection to the app can now be established (delivery state PIN 123123). Scan the QR code on the operating instructions, the app guides you through the learning process. After the connection to the app has been established, BLE+ appears in the display. The MODE and SET buttons are now locked. After 20 minutes without interacting with the timer, the connection is automatically disconnected. Change PIN: The PIN for the Bluetooth connection can be changed in the app under the Device PIN entry. Bluetooth reset (delete any changed PIN): The connection to the app must be disconnected. Press MODE and SET simultaneously for 2 seconds, RES flashes in the display. Now press SET for 2 seconds, bLE appears in the display. If you confirm with SET, the bLE reset is carried out, the PIN is deleted and the delivery status is restored. Set the time relay with the MODE and SET buttons: Pressing the MODE button selects the LCD element to be changed. The element currently being ­accessed flashes. Pressing the SET button changes the element being accessed. This can be the function, time frame, time T1 or time T2 (TI, TP, IA, EAW, ARV and ARV+ only). Each entry is terminated with the MODE key. After setting the time with MODE, no element flashes anymore - the time relay is ready for operation. Security in the event of a power failure: The parameters set are saved in an EEPROM and are therefore immediately available again after a power failure.